Machine-translated by Google. Questions are authored in English.
Top

APSC JE 2024: Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering

  • Date: 14 July 2024
  • Paper code: Advt. 29/2023
  • Language: English
  • 16 pages
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 1 of 16
Page 1 of 16
Text of page 1
JE/PHE lCynlfil24
  DO NOT OPEN THIS TEST BOOKLET UNTIL YOU ARE ASI{ED TO DO SO
Test Booklet No. :                                      Series


          0048L



TimeAllowed:2Hours
                                    TEST BOOKLET
                                                Paper-II
                                  CTTpTTCEL ENGINEERING

Read, the followtng lnstructlons carcfullg beJore gou begln to o;ftsu)et tfte guestlons :
                                                                                                  B
                                                                                                Full Marks : lOO

 1. The name of the Subject, Roll Number as mentioned in the Admission Certificate, Test Booklet No. and Series
    ,r. to U. written tegitiy a;d correctly in the space provided on the Answer-Sheet with Black/Blue ballpoint pen.
 2. Answer-Sheet wlthout marklng Serles as mentloned above ln the space provlded for in the Answer-Sheet
    shall not be evaluated.
 3. A11 questions carry equal marks.
    The Anawcr-Sheet should be submltted to the Invigllator.
    Directinnsfor giuing the ansu)ers: Directions for answering questions have alreadybeen-issued to the, lespective
    candidatei in"the instructions for marking in the OMR Answer-Sheet'along with the Admit Card and Specimen
    Copy of the OMR Answer-Sheet.
    Example:
    Suppose the following question is asked :
       The capital of Bangladesh is
        (A) Chennai
        {B) London
        (C) Dhaka
        (D) Dhubri
    You will have four alternatives in the Answer-Sheet for your response corresponding to each question of the
    Test Booklet as below :
                                                 @@@@
    In the above illustration, if your chosen response is alternative (C), i.e., Dhalia, then the same should be
    marked on the Answer-Sheet-by blackening thL relevant circle with a Black/Blue ballpoint pen only as below :
                                                 @@ao
    The example ehowrr above ls the on$ cotreot method of anewerlng.
 4. Use of eraser, blade, chemical whitener fluid to rectifr any response is prohibited.
 E. Please ensure that the Test Booklet has the required number of pages {16} and 1O0 questions immediately after
    opening the Booklet. In case of any discrepancy, please report the same to the Invigilator'
 6. No cand,idate shall be admitted to the Examination Hal{Room 20 minutes after the commencement of the
    examination.
 ?. No candidate shell Leave the Examination Hall/Room without prior permission of the Supervisor/ Imigilator. No
    i                                                   swer-Sheet and leave the Examination Hall/Room before
    expiry of the futl time allotted for each paper.
 E. No Mobile Phone, Electronic Communication Device, etc., are allowed to be carried inside the Examination
    Hall/Room by the candidates. Any Mobile Phone, Electronic Commgnication Device, etc., found in-possession
    of tlie candidate inside the Exariination Hall/Room, even if on off mode, shall be liable for confiscation.
 9. No candidate shall have in his/her possession inside the Examination Hall/Room any. boot, notebook or loose
    paper,  except his/her Admission Certificate and other connected papers permitted by the Commission.
    -Complete
lO.            silence must be observed in the Examination Halt/Room. No candidate shall copy from the paper of
         6th"r candidate, or permit his/her own paper to be copied, or give, or attempt to give, or obtain, or attempt
    "rry
    to obtain irregular assistance of any kind.
11. This Test Booklet can be caried with you after answering the questions in the prescribed Answer-Sheet.
12. Noncompliance with any of the above instructions will render a candidate liable to penalty as may be
    deemed fit.
13. No rough work is to be done on the OMR Answer-Sheet. You can do the rough work on the space provided in the
    Test Booldet.
N.B. : There wtll be negatlve marklng @ O.2S per 1 {one} inark against each wrong answer.

 t49                                                                            [ No. of Questions : 1OO
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 2 of 16
Page 2 of 16
Text of page 2
1.   The unit of viscosit5r in the CGS          5. The valve used to control the flow of
        system is                                     a fluid in a pipeline is

        {A} stokes                                    (A) gate valve
        (B) poise                                     (B) needle valve
        (C) coulomb
                                                      (C) check valve
        (D) dyne
                                                      (D) globe valve

  2. The important relation that can be
      derived by applying the momentum            6. Check valve is a t5rpe of
      balance to the steady flow of a fluid
      in potential flow without friction is           (A) pressure relief valve

        (A) equation of state                         (B) pressure reducing valve
        (B) Fick's law                                (C) unidirectional control valve
        (C) Bernoulli equation                        (D) None of tJ:e above
        (D) Arrhenius equation
                                                     The SI unit of heat transfer
       The device to measure the local                coefficient is
       velocit5r along a streamline is a/an
                                                      (A) J lm2 x
        (A) pitot tube
                                                      tB) w/m2 K
       (B) venturi meter
                                                      (c) w/m K
       (C) orifice meter
                                                      (D) J/m K
       (D) rotameter

                                                  8' Which of the following has maximum
 4. The fitting for connecting branch
                                                      thermal conductivit5r?
       lines is
                                                      (A) Iron
       H    plug

       {B) socket                                     (B) Coal

       {C) tee                                        (C) Nitrogen
       (D) cap                                        (D) Tar

JE/PHE/CHlfi/2414e-A                          2
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 3 of 16
Page 3 of 16
Text of page 3
9.   In a distillation column, all plates   13. As the reflux ratio decreases, the
       above the feed plate constitute the
                                                  (A) separation becomes more
       (A) rectiffing section                          eflicient

       tB) stripping section                      (B) number of plates decreases
       (C) reflux                                 (C) column diameter increases
       (D) reboiler                               (D) None of the above


      Distillation of crude oil is an            The use of pulverized coal in boiler
       example of                                 furnace provides

       (A) steam distillation                     (A) high calorific value
       (B) fractional distillation                 (B) better combustion
       (C) azeotropic distillation                 (C) smokeless burning
       (D) extractive distillation                 (D) less erosion on furnace walls

 11. A common apparatus used in gas          15. Which of the following has the
       absorption is
                                                   highest calorific value?
       (A) evaporator
                                                   (A) Lignite
       (B) distillation column
                                                   (B) Sub-bituminous coal
       (C) heat exchanger
                                                   (C) Anthracite
       (D) packed column
                                                   (D) Peat

 12. Berl saddle and Raschig rings are
       examples of                           16. Reynolds'number is the ratio of

       (A) building materisls                      (A) viscous forces to gravity forces

       (B) packing materials                       (B) inertial forces to viscous forces

       (C) plastic materials                       (C) viscous forces to inertial forces

        (D) adhesives                              (D) inertial forces to gravity forces

JE/PHE/C}Ilrr/24149-A                                                            lP.T.O.
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 4 of 16
Page 4 of 16
Text of page 4
17. Primary is necessary in which of the        21. The two-phase mixture of mother
      following pumps?                                liquor and crystals of all sizes,
                                                      which occupies the crystallizer and
       (A) Reciprocating                              is withdrawn as product, is called

       {B} Gear                                       (A) magma
       tC) Centritugal                                {B) sludge
       (D) Diaphragm                                  (C) nucleus
                                                      (D) lattice
      The sweetland filter is a later
       development of the
                                                     Crystallization is the formation
       (A) plate-and-frame filter                     solid particles within a

       (B) vacuum filter                              (A) heterogeneous phase
       (C) pressure leaf filter                       (B) homogeneous phase

       (D) sand filter                                (C) multilayer phase
                                                      (D) monolayer phase
 19. The speed of rotation of the rotary-
       drum filter is usually
                                                 23. Crystal growth is a/an
       (A) equal to 2 r.p.m.
                                                      (A) absorption process
       tB) more than 1 r.p.m.                         (B) distillation pnocess
       (C) more than 2 r.p.m.                         (C) diffusion proeess
      (D) less than I r,p,m.                          (D) adsorption process

 2O. The filter medium used in the rotaqr-       24. The type of dryer used for making
      drum filter is                                  milk powder is a
      (A) sand                                        (A) tray dryer
      (B) cioth                                       (B) spray dryer
      (C) gravel                                      (C) rotar5r dryer
      (D) charcoal                                    (D) vacuum dryer

JE/PHE/cHltrl24l+e-A                         +
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 5 of 16
Page 5 of 16
Text of page 5
25. For sensitive materials that cannot        29. The type of grinding mill used in
     be heated to the boiling point at              cement industry is
     atmospheric pressure, the dryer
     used is a/an                                   (A) hammer mill

     (A) tray dryer                                 F) tumbling mill
     (B) atmospheric dryer                          (C) tube ball mill
     (C) vacuum drum dryer                          (D) conical mill

     {D) festoon dryer
                                               3O. Standard screens are specified
                                                    by the
25. Comminution is a generic term for
     (A) size separation                            (A) diameter of the wire

     (B) conveying                                  (B) mrmber of meshes per inch

     (c) sedimentation                              (c) Both (A) and (B)
     (D) size reduction                             (D) None of the above


27. Amorerealisticmethodof estimating          31. One of the well-known t3pes of
     the power required for crushing and            vibrating screen is the
     grinding was given by
                                                     (A) hummer
     (A) Bond's law
                                                     (B) gt'rzzly
     {B) Fourier's law
                                                     (c) trommel
     (c) Fick,s law
                                                     (D) cYclone
     (D) Boyte's law

28. The most vgrsatile of all the grinding     32              mixer is a modilication
                                                    "firy
     miils is the
     (A} ball milt                                   tA) dry mixer

     {B)hammermill(B)kneadingmachine
     (C) tube mill                   {C) V-tYPe mi:rer
     (D) Hardinge mill                               (D) Pug mill

JE/PHE/cHlrrl24l4e-A                       5                                    [P.T.O.
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 6 of 16
Page 6 of 16
Text of page 6
33. Scrapper and apron are examples of       37. Lime is used as a basic flux in the
                                                   manufacture of
      (A) belt conveyors
                                                   {A) steel
      (B) chain conveyors
                                                   (B) brass
      (c) screw conveyors
                                                   tc) bronze
      (D) pneumatic conveJrcrs
                                                   (D) aluminium

 34. Screw conveyor is used for the           Sg. The unit process to remove double
      transportation of                            bonds in the fat and oil industry is

      (A) thin liquids                             (A) oxidation
      (B) dry solids                               (B) calcination

      (C) pasty solids                             (C) hydrogenation

      (D) hearSr particles                         tD) hydrolysis

                                              se' rh1 removal 0f soluble gas from a
 35. Froth flotation is the most suitable          solution by counter-current contact
      method for treating
                                                   with an inert gas is called
      (A) iron ores                                (A1 evaporation
      (B) sulphide ores                            (B) adsorption
      (C) quartzite                                (C) crystalliza.tion

      {D} None of the above                        (D) stripping


 36. The most common gpe of cement            4o' The nitrogen compound with the
      is the                                       largest production volume in the
                                                   world is
      {A) high alumina cement                      (A1 melamine_formaldehyde
      (B) Portland cement                          (B) urea-formaldehyde
      (C) blast furnace slag cement                (C) urea
      (D) hydraulic-lime cement                    (D) None of the above

JE/PHE/cHlrU24l4e-a                       6
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 7 of 16
Page 7 of 16
Text of page 7
41. The continuous chemical process       45. Most widely used catalyst in the
     for processing oil seeds such as          manufacture of sulphuric acid by
     groundnut, soya bean and rape-            contact process is
     seed is
                                               (A) platinum
     (A) adsorption
                                               (B) vanadium pentoxide
     (B) hydrolysis
                                               (C) alumina
     (C) polymerization
     (D) solvent extraction                    (D) silica gel

42. Direct saponification using strong    46. In municipal water treatment,
     caustic in batch process operation        filtration is carried out by using a
     is the oldest type of          the
     manufacture of                            (4 sand filter
     (A) soap                                  (B) charcoal filter
     (B) edible oils                           (C) settling tank
     (C) paints                                (D) None of the above
      (D) varnish
                                          47. Solvay process is used for the
 43. Bagasse and molasses are by-              manufacture of
     products of which of the following
     industries?.                              (A) chlorine
      (A) Cement                               (B) soda ash
      (B) Sugar                                (C) caustic soda
      (C) Soap                                 (D) sodium chloride
      (D) Paper
                                          48. The Fourdrinier machine is used in
 44. Which of the following is not a           the manufacture of
      polymerization reaction?
                                               (A) rubber
      (A) Bulk
      (B) Solution                             (B) sugar

      (C) Emulsion                             (C) cement
      (D) Hydrogenation                        (D) paper

JE/PHE/cHlrU24l4e-A                                                         lP.T.o.
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 8 of 16
Page 8 of 16
Text of page 8
49. The polyolefin plastic that has the         53. Blue vitriol is chemically
      largest production is
                                                       (A) copper sulphate
      (A) polypropylene
                                                       (B) ferrous sulphate
      (B) polyethylene
                                                       (C) copper nitrate
      (C) polyvinyl chloride
                                                       (D) aluminium sulphate
      (D) polyester
                                                 54. The nitrogen content of ammonium
 5O. The monomers that form SBR are                   nitrate is

      (A) sodium and butadiene                        (A) 2OVo

      (B) st5rene and bromine                         (B) 3s%

      (C) silicon and bromine                         {c) 45o/o

      (D) stJrrene and butadiene                      (D) 6o0/o

                                                 55. The main constituent of natural gas
 51. Baking soda          is    chemically
                                                      is
      represented by
                                                      (A) methane
      (A) Na2Co3
                                                      (B) ethane
      (B) NaHCO.
                                                      (C) propane
      (C) NarCO3'H2O
                                                      (D) butane
      (D) Na2CO3.1OH2O

                                                 56. Polfietralluoroethylene (PTFE) is
 52. Neoprene is the trade name of                    known as

      (A) polyamide                                   (A) Bakelite
      (B) phenol formaldehyde                         tB) ?eflon
      (C) po\rchloroprene                             (C) Celluloid
      (D) sBR                                         (D) Dacron

JE/PHE/CHlrrl24l4e-A                         8
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 9 of 16
Page 9 of 16
Text of page 9
57. Vulcanization of rubber                    61. The percentage of CO in flue gas is
                                                     determined by
      (A) improves elasticity
                                                     (A) spectrometer
      (B) improves hardness
                                                     (B) Orsat gas analyzer
      (C) increases resistance to organic
           solvents                                  (C) Polarimeter

      (D) All of the above                           (D) polarograph


 58. Dacron is an example of                    62. Rank of coal indicates the
      (A) polyester                                  (A) ash content

      (B) polyethylene                               (B) moisture content

      (C) polyamide                                  (C) maturity of coal

      (D) synthetic rubber                           (D) None of the above


 59. The percentage of alcohol in beer          63. Natural gas containing high amount
      may be around                                  of recoverable condensate is called

      (A) Oo/o-Lo/o                                  (A) drY natural gas

      (B) 2o/o-8o/o                                  F) water gas
      (C) l8o/r23Yo                                  (C) wet natural gas

      (D) 27o/o-32o/o                                (D) blue gas


 6O. Sulphuric acid is mainly used in the       64. The predominant compound in the
      manufachrre of                                 blast furnace gas is

      (A) fertilizers                                (A) co

      (B) steel                                      (B) H2

      (C) paper                                      (c) N2

      (D) paint                                      (D) 02

JE/PHE/cHlrr/2414e-A                        9                                     lP.r.o.
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 10 of 16
Page 10 of 16
Text of page 10
65. When air comes in contact with                68. Aviation gasoline has octane number
      ignited solid amorphous carbon, it
      results in the formation of                       (A) less than 5O

      (A) producer gas
                                                        (B) equal to 5O
      (B) blue gas
                                                        (C) less than IOO
      (C) water gas
                                                        (D) equal to 100
      (D) biogas

                                                   69. The undesirable component in
     The gas produced by the degradation                kerosene is
      of biological matter by the action of
      anaerobic bacteria in the absence of              (A) aromatic
      free oxygen is
                                                        (B) naphthene
      (A) natural gas

      (B) biogas                                        {C) paraffin

                                                        (D) benzene
      (c) LPG

      (D) cNG
                                                   7O. The lowest temperature at which
                                                        vapours given off by the oil ignites
                                                        and. continues to burn for at least
 67. The    range of temperature                        5 seconds when a small flame is
      maintained in electrical desalting of
                                                        brought near to it, is
      crude oil is

      (A) 1OO "C-12O "C                                 (A) flash point

      tB) 120 "C-130 "C                                 {B) cloud point

      (c) 15O "C-180 .C                                 (C) smoke point

      (D) 2OO'C-230 oC                                  (D) fire point

JE/PHE/cH/il/2414e-A                          10
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 11 of 16
Page 11 of 16
Text of page 11
71. The apparatus used for measuring          75. Tachometer measures the
      flash point below 50'C is
                                                     (A) flow rate
      (A) Pensky-Martens
                                                     (B) composition
      (B) Abel's apparatus
                                                    (C) speed (r.p.m.)
      (C) Cleveland
                                                    (D) pressure
      tD) Ring and Ball
                                               ?6. In Fourier's law, the proportionality
 72. The carbon residue of an oil is                constant is called the
      determined by
                                                    (A) heat transfer coefficient
      (A) smoke point
                                                    (B) thermal diffusivity
      (B) bomb calorimeter                          (c) thermal conductivity
      (c) Ramsbottom test
                                                    1D) stefan-Boltzmann constant
      (D) Abel's apparatus
                                               77. Baffles are provided in          heat
                                                    exchangers to
 73. Renewable energr resources include
                                                    (A) increase the fouling factor
      (A) sunlight
      (B)wind(B)decreasetheheattransferarea
                                                    (C) increase the heat transfer
      (c) geothermal heat                                coefficient

      (D) All of the above
                                                    tD) increase the heat transfer rate

 74. Temperatures in "F and K are the          Zg. perfect reproducibility means the
      same at                                       instrument has

      {A) o                                         (A) no drift
      (ts) 212                                      (B) point drift
      (c) s74.6                                     (C) load drift
      (D) 273.\s                                    (D) calibration drift

JE/PHE/CHlrU24l49-A                       11                                     lP,T.O.
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 12 of 16
Page 12 of 16
Text of page 12
79. Which of the following is/are                  83. Thermocouples employ two
    undesirable characteristic(s) of an
      instrument?                                       (A) dissimilar metal wires

      {A} High fidelity                                 (B) dissimilar metal strips
      (B) High reproducibility                          (C) similar metal wires
      (c) High measuring lag
                                                        1D) similar metal strips
      (D) Both {A) and {B)
                                                   84. Which one of the following is a solid
8O. Transducers may be           classified             expansion thermometer?
     according to their
                                                        (A) Bimetallic thermometer
      (A) method of energr conversion
                                                        (B) $rometer
      (B) nature of output signal
                                                        (c) ThermocouPle
      {c) application
      (D) A11 of the above                              (D) None of the above


81. I atmospheric pressure in terms of             88. Orifice plates are usually made of
      psi at mean sea level is
                                                         (A) wood
      (A) 12'6e
                                                         (B) Plastic
      tB) 14'6e
      (C) 16'69                                          (C) ceramic

      (D) 18'69                                          (D) stainless steel

 82. What is the purpose of a sight glass          g6. The working principle of mercury in     ,
      in a boiler system?                               ghss thermometer is
       -' To
      {A)
      \-           monitor
                   .::"^**'
                                 electrical
                                                         (A) volumetric e:rpansion
           conductivity

      tB)Tomonitorflowrate(B)pressurerisewithtemperature
      {c) To obsenre water level        (c) linear expansion
      (D) To measure steam temperature                   (D) None of the above

JE/PHE/CHlrrl24l4e-a                          L2
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 13 of 16
Page 13 of 16
Text of page 13
87. Which of the following is not a            91. Theoperationof arotameterisbased
      mechanical pressure-sensing                    on
      element?
                                                     (A) variable area flow
      (A) Bellow
                                                     (B) rotation of turbine
      (B) Diaphragm
      (C)Bourdontube(C)pressuredropacrossanozzle
      (D) U-tube manometer                           (D) pressure at a stagnation point


 88. On-off controllers are normally used       92. ln a vortex flow meter, what is the
      for                                            relationship between frequency of
                                                     vortices and fluid-flow rate?
      (A) low roads
      (B) temperature changes                        (A) Directly proportional

      (C) flow-rate changes                          E) Inversely proportional
      (D) None of the above                          (C) Constant

                                                     (D) No relationship
 89. How does resistance of a Negative
      Temperature Coefficient (NTC)
      thermistor change with increase in        93. Strip chart recorder is a/an
      temperature?
                                                     (A) oscillographic recorder
      (A) lncreases
                                                     (B) non-analog recorder
      (B) Decreases
      {C) Increases exponentially                    (C} graphic recorder

      (D) Remains constant                           (D) magnetic-tape recorder

 9O. Gas chromatography is used for the         94. Set-point of a system is also called
      measurement of
                                                     (A) disturbance
      (A) temperature
      (B) pressure                                   (B) desired value

      (C) flow rate                                  (C) measured value

      (D) concentration                              (D) manipulated value

JE/PHE/C}llrrl24l4e-A                      13                                      lP.T.O.
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 14 of 16
Page 14 of 16
Text of page 14
95. In proportional control, the output of        98. Final control elements receive srgnal
     the controller is                                 from a controller and adjust
                                                        accordingly the value of the
      (A) directly proportional to set
          pourt(A)controlledvariable
                                                        (B) process variable
      (B) directry proportional to error
                                                        (C) load variable
      (C) inversely proportional to set
          point                                         (D) maniPulated variable

      (D) inversely proportional to error
                                                  99. Which of the following characterizes
                                                        the distributed control system?

96. Reset control action is also known as               (A) Distributed processing

                                                        (B) Distributed data
      (A) two-position control action
                                                        (C) Distributed control
     (B) proportional control action
                                                        (D) All of the above
     tC) integral conEol action
                                                  1OO. Proeess instrumentation diagram
     (D) derivative control action                      provides


                                                        tA) process flow diagram
97. What type of control action does                    (B) schematic layout of the process
    a self-operated level
     typicauy   provide?
                       "orrt.ou",
                                                              #["1f:'"ffX$:j-:f,jJ .
     (A) on-off control                                 (c) requisites for process system
                                                            analysis and equipment
     (B) Derivative control                                   specifications

                                                        (D)
     (c) proportionat control                                 ::::,T:::-  ^fft^-
                                                              speclncauon or        ^:::jan(r
                                                                             tne process
                                                              plant equipment but together
      (D) Integral control                                    with instmmentation equipment

JE/PHE/CH|[U24|49-A                          t4
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 15 of 16
Page 15 of 16
APSC JE 2024 question paper, Junior Engineer, Public Health Engineering Department (Advt. 29/2023), Chemical Engineering, page 16 of 16
Page 16 of 16
Text of page 16
SPACE FOR ROUGH WORK




                               ***
JElPHE/CH/fi/2414e-A            16            24T-125x4
Page 1 of 16

Source: Assam Public Service Commission. Question paper published by Assam Public Service Commission.

Other years