Machine-translated by Google. Questions are authored in English.
Top

Chemical Reaction Engineering Questions and Answers

1.

The rate of a homogeneous reaction is normally defined per unit

Answer: A

For a homogeneous reaction the volume is the natural basis, while catalytic rates are defined per unit mass or area of catalyst. Stating the basis is part of stating the rate at all. Concentration is the natural variable for the fluid phase.

Please log in or register to report this question.

2.

Assertion (A): The rate of a heterogeneous catalytic reaction is defined per unit mass of catalyst rather than per unit volume.
Reason (R): The reaction takes place on the catalyst surface rather than throughout the fluid.

Answer: B

Both are true and the reason gives the justification: doubling the fluid volume without adding catalyst does not double the rate, so volume is not the quantity the rate is proportional to. The catalyst is what the reaction actually needs.

Please log in or register to report this question.

Answer: C

Correct answer: determined experimentally and need not be a whole number

Order is an empirical description of how the rate responds to concentration, obtained by fitting data, and it may be fractional, zero or even negative - a chain reaction commonly shows an order of one half, and a product-inhibited reaction a negative one. Molecularity counts the molecules taking part in one elementary step and is necessarily a small positive integer.

Please log in or register to report this question.

4.

Consider the following statements about order and molecularity.
1. Order is determined from experimental rate data.
2. Molecularity applies only to an elementary step.
3. Order and molecularity are always numerically equal.

Answer: D

Correct answer: 1 and 2 only

Statements 1 and 2 are correct: order comes from experiment, and molecularity is meaningful only for an elementary step, since an overall equation is a summary rather than a mechanism. Statement 3 is true only for elementary reactions and false in general - the equality is the exception that identifies a step as elementary, not a rule that applies to overall reactions.

Please log in or register to report this question.

5.

State whether the following is true or false.
Reaction order can be fractional or negative.

Answer: A

A chain reaction may show an order of one and a half, and a species that inhibits a reaction appears with a negative exponent. Both are perfectly ordinary results from fitting a rate law. Chain reactions often show half integer orders.

Please log in or register to report this question.

6.

A reaction is second order overall. What are the units of its rate constant when the rate is in moles per litre per second?

Answer: B

Dividing the rate units by concentration squared leaves litres per mole per second. Checking the units of a rate constant is the quickest way to confirm the order it was fitted for. The exponent decides what units remain.

Please log in or register to report this question.

7.

Match each reaction order with the units of its rate constant, with rate in moles per litre per second.
List I
A. Zero order
B. First order
C. Second order
D. Third order
List II
1. litres per mole per second
2. moles per litre per second
3. litres squared per mole squared per second
4. per second

Answer: C

Correct answer: A-2, B-4, C-1, D-3

The units follow from \( \mathrm{rate} = kC^{n} \): since the rate is fixed in moles per litre per second, \( k \) must carry whatever units are needed to cancel \( C^{n} \). So \( k \) has the units of rate at zero order, reciprocal seconds at first, litres per mole per second at second, and litres squared per mole squared per second at third. The pattern is that each additional order adds a factor of litres per mole.

Please log in or register to report this question.

8.

Assertion (A): The units of a rate constant reveal the order of the reaction.
Reason (R): The constant must carry whatever units make the rate expression dimensionally consistent.

Answer: D

Both are true and the reason gives the mechanism: the concentration term supplies units raised to the order, so the constant must supply the remainder for the product to come out as a rate. A units check is quicker than refitting the data.

Please log in or register to report this question.

Answer: A

The exponential dependence is why modest temperature changes have such large effects on rate. Plotting the logarithm of the constant against reciprocal temperature gives a straight line of slope minus the activation energy over R.

Please log in or register to report this question.

10.

A reaction has an activation energy of about 50 kilojoules per mole. Roughly what happens to its rate for a ten degree rise near room temperature?

Answer: B

Correct answer: it roughly doubles

From the Arrhenius equation, \[ \frac{k_2}{k_1} = \exp\left[\frac{E_a}{R}\left(\frac{1}{T_1}-\frac{1}{T_2}\right)\right] = \exp\left[\frac{50{,}000}{8.314}\left(\frac{1}{298}-\frac{1}{308}\right)\right] = e^{0.655} = 1.9. \] The familiar rule that rate doubles for a ten degree rise is therefore not a law but a coincidence of the activation energies most ordinary reactions happen to have - a reaction of 25 kJ/mol would rise by only about forty per cent.

Please log in or register to report this question.

Loading…
Tags: Rate Laws and Reaction Kinetics Questions and Answers || Rate Laws and Reaction Kinetics MCQ Questions and Answers || Rate Laws and Reaction Kinetics GK Questions and Answers || Rate Laws and Reaction Kinetics GK MCQ Questions || Rate Laws and Reaction Kinetics Multiple Choice Questions and Answers || Rate Laws and Reaction Kinetics GK || GK on Rate Laws and Reaction Kinetics || Chemical Reaction Engineering Questions and Answers || Chemical Reaction Engineering MCQ Questions and Answers || Chemical Reaction Engineering GK Questions and Answers || GK on Chemical Reaction Engineering