Machine-translated by Google. Questions are authored in English.
Top

Computer Operating System Questions and Answers

Answer: A

Correct answer: Is run after config.sys on system boot-up

AUTOEXEC.BAT is a batch file of ordinary commands, so it can only run once COMMAND.COM has been loaded - which happens after CONFIG.SYS has been read and its drivers installed. That is why drivers go in CONFIG.SYS and commands such as PATH and SET go in AUTOEXEC.BAT.

Please log in or register to report this question.

292.

If you do not know which version of MS-DOS you are working with, which command will you use after having booted your operating system?

Answer: C

Correct answer: VER command

VER displays the version of MS-DOS currently running. DIR lists files, FORMAT prepares a disk, and there is no DISK command for this purpose.

Please log in or register to report this question.

293.

Which among the following Operating System does not implement multitasking truly?

Answer: D

Correct answer: MS DOS

MS-DOS is single-tasking: it runs one program at a time and has no scheduler, which is why background behaviour had to be faked with terminate-and-stay-resident tricks. Windows 98, NT and XP all schedule several processes genuinely concurrently.

Please log in or register to report this question.

294.

To find out how much memory is available, you could type______.

Answer: B

Correct answer: MEM

MEM reports how memory is being used - conventional, upper, extended and expanded - and how much of each is free. CHKDSK reports on the disk, and MEMMAKER rearranges drivers to free conventional memory rather than reporting on it.

Please log in or register to report this question.

Answer: A

Correct answer: allows the programmer to write base registers and displacements explicitly in the source program

The System/370 addresses memory as a base register plus a displacement, and its assembler language lets the programmer write both explicitly - or leave the assembler to supply them from a USING declaration. That control over addressing is characteristic of the language.

Please log in or register to report this question.

296.

Which DOS command will configure a serial printing port?

Answer: B

Correct answer: Mode LPT1=COM1

MODE LPT1=COM1 redirects output sent to the first parallel port so that it goes to the first serial port instead, which is what allows a program that only knows how to print to LPT1 to drive a serial printer. The serial line’s speed and parity are set with a separate MODE command.

Please log in or register to report this question.

Answer: B

Correct answer: consists of those addresses that may be generated by a processor during execution

The virtual address space is the whole set of addresses a program may generate, which is fixed by the width of the address field rather than by how much physical memory exists. Address translation maps the part in use onto real frames; the rest lives on disk.

Please log in or register to report this question.

298.

You suspect a virus has entered your computer. What will not be affected by the virus?

Answer: A

Correct answer: CMOS

A virus infects things that are read as programs or as file data - the boot sector, program files, the contents of floppies. The CMOS holds only the setup values (date, drive types, boot order) and is never executed, so a virus has nothing to infect there.

Please log in or register to report this question.

299.

Which page replacement algorithm gives the lowest possible page fault rate but cannot be implemented in practice ?

Answer: B

Correct answer: Optimal

The optimal algorithm replaces the page that will not be needed for the longest time ahead, which requires knowing the future reference string. It cannot be implemented, but it serves as the benchmark against which FIFO and LRU are measured.

Please log in or register to report this question.

Answer: B

Correct answer: terminate and stay resident program

A TSR returns control to DOS but leaves its code in memory, normally with an interrupt vector pointing into it, so it can be re-entered by a hot key or by the hardware event it services. It was the only way to get background behaviour out of a single-tasking system.

Please log in or register to report this question.

Loading…
Tags: Computer Operating System Questions and Answers || Computer Operating System MCQ Questions and Answers || Computer Operating System GK Questions and Answers || Computer Operating System GK MCQ Questions || Computer Operating System Multiple Choice Questions and Answers || Computer Operating System GK || GK on Computer Operating System || Computer Awareness Questions and Answers || Computer Awareness MCQ Questions and Answers || Computer Awareness GK Questions and Answers || GK on Computer Awareness