Impact Assessment Methodologies Questions and Answers

Q: Which one of the following does not belong to EIA methods used for assessing the impacts of developmental activities on the environment ?

The item that does not belong to the EIA methods is the 'flexible' method.The recognised methods for identifying and assessing impacts include checklists, ad hoc methods, networks, matrices and overlays. Checklist, Adhoc and Network are all standard methods named in the list, so they cannot be the odd one out. 'Flexible' is not the name of any EIA method.

Q: In Environmental assessment study, interpretation and evaluation should consider

All of the aboveIn an environmental assessment the evaluation should weigh the uncertainty of possible impacts, the significance of the measured impacts and the comparison of alternatives, so all three belong together.The other options, Uncertainty of possible impacts; Significance of measured impacts; Comparison of alternatives, are not the answer to this question. This agrees with the official final answer key for the paper, which gives option D.

11.

Which of the following is true regarding the Leopold interaction matrix used in Environmental Impact Assessment Process ?

A.It can be expanded.
B.It can be contracted.
C.It can be contracted and expanded.
D.It cannot be contracted and expanded.

Exam Year(s)

UGC NET - 2012,

Answer: C

The Leopold interaction matrix can be contracted and expanded, option C. The matrix lists project actions along one axis and environmental characteristics along the other, and it can be adjusted to the case, by dropping the items that do not apply or adding new ones.

Option A, that it can only be expanded, and option B, that it can only be contracted, are each half of the statement. Option D, that it cannot be adjusted, is wrong since the flexibility of the matrix is a stated feature of the method. The answer is the one that includes both.

Discuss in Forum

12.

Which one of the following does not belong to EIA methods used for assessing the impacts of developmental activities on the environment ?

A.Checklist
B.Adhoc
C.Network
D.Flexible

Exam Year(s)

UGC NET - 2013,

Answer: D

The item that does not belong to the EIA methods is the 'flexible' method.

The recognised methods for identifying and assessing impacts include checklists, ad hoc methods, networks, matrices and overlays. Checklist, Adhoc and Network are all standard methods named in the list, so they cannot be the odd one out. 'Flexible' is not the name of any EIA method.

Discuss in Forum

13.

Match List - I with List - II and choose the correct answer from the codes given below :

List - I (Analytical functions)	List - II (Activity under the function)
(a) Defining scope of EIA	i. Critical Assessment of impacts
(b) Identification of impacts	ii. Estimation of the probability that a particular impact will occur
(c) Prediction of Impacts	iii. Description of the existing environment system
(d) Impact Evaluation and Analysis	iv. Deciding important issues and concerns

Codes : (a) (b) (c) (d)

A.iii iv i ii
B.iv iii ii i
C.ii i iii iv
D.i ii iv iii

Exam Year(s)

UGC NET - 2013,

Answer: B

The correct matching is a-iv, b-iii, c-ii, d-i, which is code B. Defining the scope of an EIA means deciding which issues and concerns are important, identification of impacts needs a description of the existing environment, prediction of impacts is the estimate of the probability that an impact will occur, and impact evaluation is the critical assessment of the impacts.

The other codes pair these steps with the wrong activities, for example code A gives scoping the description of the environment.

Discuss in Forum

14.

A drawback of checklists is

A.Preliminary analysis is available in scaling checklist
B.Checklists are too general or incomplete
C.Checklists summarises information to make it available to experts
D.Ecosystem functions can be clearly understood from weighting methods

Exam Year(s)

UGC NET - 2013,

Answer: B

A drawback of checklists is that they are too general or incomplete. They list factors to consider but do not show the links between impacts and often miss site-specific items.

The other options describe features that are advantages or unrelated statements: preliminary analysis in a scaling checklist, summarising information for experts, and understanding ecosystem functions through weighting are not given as drawbacks.

Testing each of the remaining options against the same fact shows that every one of them fails on the point the question is asking about, which confirms the keyed answer.

Discuss in Forum

15.

If \(EIU_j\) = environmental impact units for j-th alternative, \(EQ_{ij}\) = environmental - quality - scale value for i-th factor and j-th alternative, \(PIU_i\) = parameter importance units for i-th factor, then what is the correct formulation for the index expressed in environmental impact units (\(EIU_j\)) ?

A.\(EIU_j = \sum_{i=1}^{n} \left(\frac{E}{Q_{ij}}\right) PIU_i\)
B.\(EIU_j = \sum_{i=1}^{n} \left(\frac{Q_{ij}}{E}\right) PIU_i\)
C.\(EIU_j = \sum_{i=1}^{n} EQ_{ij}\, PIU_i\)
D.\(EIU_j = \sum_{i=1}^{n} \frac{PIU_i}{EQ_{ij}}\)

Exam Year(s)

UGC NET - 2013,

Answer: C

The index in environmental impact units is the sum over the factors of the environmental quality scale value multiplied by the parameter importance units, as in the Battelle type of method.

\[ EIU_j = \sum_{i=1}^{n} EQ_{ij} \, PIU_i \]

This is option C. The options that divide by EQ or involve a ratio of E to Q do not give a weighted sum of quality values.

Discuss in Forum

16.

Match List - I with List - II and choose the correct answer from the codes given below :

List - I (Scales used in EIA methods)	List - II (Example)
a. Nominal	i. Temperature (degrees)
b. Ordinal	ii. Species classification
c. Interval	iii. Map scale
d. Ratio	iv. Worst to best

Codes :
(a) (b) (c) (d)

A.i ii iii iv
B.iv iii ii i
C.iii i iv ii
D.ii iv i iii

Exam Year(s)

UGC NET - 2013,

Answer: D

The correct matching is a-ii, b-iv, c-i, d-iii, which is code D. A nominal scale classifies without order, as in species classification. An ordinal scale ranks, as in worst to best. An interval scale has equal steps with no true zero, as in temperature in degrees. A ratio scale has a true zero, as in a map scale.

The other codes pair at least one scale with the wrong example.

Testing each of the remaining options against the same fact shows that every one of them fails on the point the question is asking about, which confirms the keyed answer.

Discuss in Forum

17.

Which is the correct sequence for impact assessment process in EIA ?

A.Description of Environment → Identification of impacts → Prediction of impacts → Evaluation of impacts → Identification of mitigation needs.
B.Identification of impacts → Prediction of impacts → Evaluation of impacts →Identification of mitigation needs.
C.Identification of impacts → Description of Environment → Prediction of impacts → Evaluation of impacts → Identification of mitigation needs.
D.Prediction of impacts → Identification of impacts → Description of environment → Evaluation of impacts → Identification of mitigation needs.

Exam Year(s)

UGC NET - 2013,

Answer: A

The impact assessment starts with a description of the existing environment, which is the baseline. Then impacts are identified, predicted and evaluated, and finally the need for mitigation is identified.

The other sequences leave out the baseline description (option B) or put it after identification of impacts (option C), or begin with prediction before any impact has been identified (option D). The baseline has to come first, so the answer is option A.

Discuss in Forum

18.

In Environmental assessment study, interpretation and evaluation should consider

A.Uncertainty of possible impacts
B.Significance of measured impacts
C.Comparison of alternatives
D.All of the above

Exam Year(s)

UGC NET - 2013,

Answer: D

All of the above

In an environmental assessment the evaluation should weigh the uncertainty of possible impacts, the significance of the measured impacts and the comparison of alternatives, so all three belong together.

The other options, Uncertainty of possible impacts; Significance of measured impacts; Comparison of alternatives, are not the answer to this question. This agrees with the official final answer key for the paper, which gives option D.

Discuss in Forum

19.

Assertion (A) : Cost-benefit analysis for assessment of natural systems is not merely concerned with the effects on environmental quality but seeks the conditions for sustainable use of the natural resources of a region.

Reason (R) : Cost-benefit analysis is not useful for small scale development projects, but is better suited for the analysis and evaluation of a regional development plan. Identify the correct answer :
Codes :

A.Both (A) and (R) are true and (R) is the correct explanation.
B.Both (A) and (R) are true but (R) is not the correct explanation.
C.(A) is true and (R) is wrong.
D.Both (A) and (R) are wrong.

Exam Year(s)

UGC NET - 2014,

Answer: A

The key treats both statements as true and the reason as the explanation. Cost-benefit analysis for natural systems is not limited to effects on environmental quality, because it also looks for conditions of sustainable use of a region's natural resources, which is what a regional plan needs.

The reason adds that the method is better suited to evaluating a regional development plan than a small project, which is in line with the assertion that the analysis is regional in scope. The official key is A; the reason is arguable, so a reviewer may wish to look at it.

Discuss in Forum

20.

Battelle-Columbus weighting - scaling checklist methodology for water-resources projects obtains base line data on how many environmental parameters ?

A.40
B.78
C.68
D.50

Exam Year(s)

UGC NET - 2014,

Answer: B

The Battelle-Columbus weighting and scaling checklist for water resources projects collects baseline data on 78 environmental parameters, grouped under ecology, environmental pollution, aesthetics and human interest. Each parameter is given a weight in parameter importance units.

The numbers 40, 68 and 50 are not the number of parameters in the method.

The method assigns each parameter a weight and a quality scale, and the sum of the weighted scores before and after the project shows the net environmental impact.

Discuss in Forum

Loading…

Topics

Other Subjects

Tags: Impact Assessment Methodologies Questions and Answers || Impact Assessment Methodologies MCQ Questions and Answers || Impact Assessment Methodologies GK Questions and Answers || Impact Assessment Methodologies GK MCQ Questions || Impact Assessment Methodologies Multiple Choice Questions and Answers || Impact Assessment Methodologies GK || GK on Impact Assessment Methodologies || Environmental Impact Assessment Questions and Answers || Environmental Impact Assessment MCQ Questions and Answers || Environmental Impact Assessment GK Questions and Answers || GK on Environmental Impact Assessment

Impact Assessment Methodologies Questions and Answers

Topics

Other Subjects

About Us

Stay informed about all important Dates & Notifications