Control Instructions Questions and Answers

Q: What will be the output of the following C program segment? char inchar = 'A'; switch (inchar) { case 'A' : printf ("choice A \n") ; case 'B' : printf ("choice B ") ; case 'C' : case 'D' : case 'E' : default: printf ("No Choice") ; }

Correct answer: Choice A Choice B No ChoiceThere is no break after the first printf, so execution falls through every following label. Matching case 'A' prints “choice A”, then “choice B”, then - passing through the empty labels C, D and E - the default prints “No Choice”. A case label marks an entry point, not a block.

Q: Which of the following for loops covers the same range of values of i as for (i = 0; i < n; i++)?

Correct answer: for (i = n-1; i>-1; i--)for (i = 0; i < n; i++) visits 0 to n-1. Running the same range backwards means starting at n-1 and continuing while i is still at least 0 - that is, while i > -1. The alternatives either start at n, which is out of range, or stop at i > 0, which misses the element at index 0.

Q: A labelled statement consists of an identifier followed by

Correct answer: :A label is an identifier followed by a colon - here: - marking a point that goto can jump to. The same colon form is used by case and default labels inside a switch. Labels have function scope, so a goto can only reach one in the same function.

Q: goto can be used to jump from main into another function.

Correct answer: FALSEgoto can only reach a label in the same function; labels have function scope and are invisible outside it. Jumping between functions would leave the stack in an inconsistent state. Where a non-local jump really is needed, setjmp and longjmp provide a disciplined version of it.

Q: What is the output of this C code? int main() { int *p = NULL; for (foo(); p; p = 0) printf("In for loop\n"); printf("After loop\n"); }

Correct answer: Compile time errorfoo is never declared or defined anywhere in this program. Under the current C rules an undeclared function is an error, and even where it is only a warning the missing definition would fail at link time. So the program does not run at all - the value of p is beside the point.

Q: In the loop construct for(exp1; exp2; exp3), which part is always executed exactly once?

Correct answer: exp1exp1, the initialisation, is evaluated once before the loop starts and never again. exp2, the condition, is evaluated before every pass - at least once, and once more than the body runs. exp3, the update, runs after each pass, so it may not run at all if the condition fails immediately.

Q: What will be the output of the program? #include <stdio.h> int main() { int x = 3; float y = 3.0; if(x == y) printf("x and y are equal"); else printf("x and y are not equal"); return 0; }

Correct answer: x and y are equalWhen an int and a float are compared, the int is converted to floating point first. Both values are then exactly 3.0 - and 3 is one of the values a float can represent exactly - so the comparison succeeds. It is only fractional values such as 0.1 that make such comparisons unreliable.

Q: What will be the output of the program? #include <stdio.h> int main() { int a=0, b=1, c=3; *((a) ? &b : &a) = a ? b : c; printf("%d, %d, %d\n", a, b, c); return 0; }

Correct answer: 3, 1, 3Both conditionals test a, which is 0 and therefore false. The left-hand side selects &a, so the assignment targets a; the right-hand side selects c, which is 3. So a becomes 3 while b and c are untouched, giving 3, 1, 3. Note that a conditional expression can be dereferenced to form an lvalue like this only because both branches are pointers.

Q: Which of the following statements are correct about the below program? #include <stdio.h> int main() { int i = 10, j = 20; if(i = 5) && if(j = 10) printf("Have a nice day"); return 0; }

Correct answer: Error: Expression syntaxif is a statement, not an expression, so it cannot be an operand of &&. The line if(i = 5) && if(j = 10) is simply not C. The intended test would be written if((i = 5) && (j = 10)).

31.

What will be the output of the following C program segment?

char inchar = 'A';
switch (inchar)
{
case 'A' :
    printf ("choice A \n") ;
case 'B' :
    printf ("choice B ") ;
case 'C' :
case 'D' :
case 'E' :
default:
    printf ("No Choice") ;
}

A.No choice
B.Choice A
C.Choice AChoice B No choice
D.Program gives no output as it is erroneous

Answer: C

Correct answer: Choice A Choice B No Choice

There is no break after the first printf, so execution falls through every following label. Matching case 'A' prints “choice A”, then “choice B”, then - passing through the empty labels C, D and E - the default prints “No Choice”. A case label marks an entry point, not a block.

Discuss in Forum

32.

Which of the following for loops covers the same range of values of i as for (i = 0; i < n; i++)?

A.for (i = n; i>0; i--)
B.for (i = n; i>=0; i--)
C.for (i = n-1; i>0; i--)
D.for (i = n-1; i>-1; i--)

Answer: D

Correct answer: for (i = n-1; i>-1; i--)

for (i = 0; i < n; i++) visits 0 to n-1. Running the same range backwards means starting at n-1 and continuing while i is still at least 0 - that is, while i > -1. The alternatives either start at n, which is out of range, or stop at i > 0, which misses the element at index 0.

Discuss in Forum

33.

Point out the error, if any in the while loop.

#include <stdio.h>
int main()
{
    int i=1;
    while()
    {
        printf("%d\n", i++);
        if(i>10)
           break;
    }
    return 0;
}

A.There should be a condition in the while loop
B.There should be at least a semicolon in the while
C.The while loop should be replaced with for loop.
D.No error

Answer: A

Correct answer: There should be a condition in the while loop

Unlike for, a while requires a controlling expression - while() is a syntax error. The equivalent infinite loop is written while(1), or for(;;), where an omitted condition is defined to be true.

Discuss in Forum

34.

A labelled statement consists of an identifier followed by

Answer: B

Correct answer: :

A label is an identifier followed by a colon - here: - marking a point that goto can jump to. The same colon form is used by case and default labels inside a switch. Labels have function scope, so a goto can only reach one in the same function.

Discuss in Forum

35.

goto can be used to jump from main into another function.

A.TRUE
B.FALSE
C.May Be
D.Can't Say

Answer: B

Correct answer: FALSE

goto can only reach a label in the same function; labels have function scope and are invisible outside it. Jumping between functions would leave the stack in an inconsistent state. Where a non-local jump really is needed, setjmp and longjmp provide a disciplined version of it.

Discuss in Forum

36.

What is the output of this C code?

int main()

    {

        int *p = NULL;

        for (foo(); p; p = 0)

            printf("In for loop\n");

            printf("After loop\n");

    }

A.In for loop after loop
B.Compile time error
C.Infinite loop
D.Depends on the value of NULL

Answer: B

Correct answer: Compile time error

foo is never declared or defined anywhere in this program. Under the current C rules an undeclared function is an error, and even where it is only a warning the missing definition would fail at link time. So the program does not run at all - the value of p is beside the point.

Discuss in Forum

37.

In the loop construct for(exp1; exp2; exp3), which part is always executed exactly once?

A.exp1
B.exp3
C.exp1 and exp3
D.exp1, exp2 and exp3

Answer: A

Correct answer: exp1

exp1, the initialisation, is evaluated once before the loop starts and never again. exp2, the condition, is evaluated before every pass - at least once, and once more than the body runs. exp3, the update, runs after each pass, so it may not run at all if the condition fails immediately.

Discuss in Forum

38.

What will be the output of the program?

#include <stdio.h>
int main()
{
    int x = 3;
    float y = 3.0;
    if(x == y)
        printf("x and y are equal");
    else
        printf("x and y are not equal");
    return 0;
}

A.x and y are equal
B.x and y are not equal
C.Unpredictable
D.No output

Answer: A

Correct answer: x and y are equal

When an int and a float are compared, the int is converted to floating point first. Both values are then exactly 3.0 - and 3 is one of the values a float can represent exactly - so the comparison succeeds. It is only fractional values such as 0.1 that make such comparisons unreliable.

Discuss in Forum

39.

What will be the output of the program?

#include <stdio.h>
int main()
{
    int a=0, b=1, c=3;
    *((a) ? &b : &a) = a ? b : c;
    printf("%d, %d, %d\n", a, b, c);
    return 0;
}

A.0, 1, 3
B.1, 2, 3
C.3, 1, 3
D.1, 3, 1

Answer: C

Correct answer: 3, 1, 3

Both conditionals test a, which is 0 and therefore false. The left-hand side selects &a, so the assignment targets a; the right-hand side selects c, which is 3. So a becomes 3 while b and c are untouched, giving 3, 1, 3. Note that a conditional expression can be dereferenced to form an lvalue like this only because both branches are pointers.

Discuss in Forum

40.

Which of the following statements are correct about the below program?

#include <stdio.h>
int main()
{
    int i = 10, j = 20;
    if(i = 5) && if(j = 10)
        printf("Have a nice day");
    return 0;
}

A.Output: Have a nice day
B.No output
C.Error: Expression syntax
D.Error: Undeclared identifier if

Answer: C

Correct answer: Error: Expression syntax

if is a statement, not an expression, so it cannot be an operand of &&. The line if(i = 5) && if(j = 10) is simply not C. The intended test would be written if((i = 5) && (j = 10)).

Discuss in Forum

Loading…

Topics

Subject Categories

Tags: Control Instructions Questions and Answers || Control Instructions MCQ Questions and Answers || Control Instructions GK Questions and Answers || Control Instructions GK MCQ Questions || Control Instructions Multiple Choice Questions and Answers || Control Instructions GK || GK on Control Instructions || C Programming Questions and Answers || C Programming MCQ Questions and Answers || C Programming GK Questions and Answers || GK on C Programming

Control Instructions Questions and Answers

Topics

Subject Categories

About Us

Stay informed about all important Dates & Notifications