Machine-translated by Google. Questions are authored in English.
Top

Physics Questions and Answers

291.

Sound travels with a different speed in media. In what order does the velocity of sound increase in these media?

Answer: C

The order is air, water, iron.

Speed is \(v = \sqrt{E/\rho}\), and the elastic modulus rises far more sharply from gas to liquid to solid than the density does. Sound travels at about \(343\ \mathrm{m\,s^{-1}}\) in air, \(1{,}500\) in water and \(5{,}100\) in iron.

Please log in or register to report this question.

Answer: B

Because soft iron has large susceptibility and small retentivity.

High susceptibility means it magnetises strongly and concentrates the flux; low retentivity means it loses that magnetism almost entirely the moment the current is switched off - exactly what an electromagnet must do. Steel, with high retentivity, is used for permanent magnets.

Please log in or register to report this question.

293.

A disk and a sphere of same radius but different masses roll on two inclined planes of the same altitude and length. Which one of the two objects gets to the bottom of the plane first ?

Answer: B

The sphere reaches the bottom first.

For a body rolling without slipping, \[a = \frac{g\sin\theta}{1 + k^2/R^2}\] The ratio \(k^2/R^2\) is \(2/5\) for a solid sphere and \(1/2\) for a disc, so the sphere has the larger acceleration. Mass and radius cancel out entirely - only the shape matters.

Please log in or register to report this question.

294.

Which of the following statements about the propagation speed of communication channels is correct?

Answer: A

All operate at nearly the same propagation speed.

Microwaves and radio waves are both electromagnetic and travel at \(3\times10^{8}\ \mathrm{m\,s^{-1}}\) in air. Light in an optical fibre goes at \(c/n\), about two-thirds of that, so fibre is if anything slightly slower - its advantage is enormous bandwidth, not speed.

Please log in or register to report this question.

Answer: B

Viscosity is measured in newton second per square metre.

From Newton's law of viscous flow, \[F = \eta A \frac{dv}{dx} \Rightarrow \eta = \frac{F}{A\,(dv/dx)}\] which gives \(\mathrm{N\,s\,m^{-2}}\), also written as the pascal second. The CGS unit is the poise, and \(1\ \mathrm{Pa\,s} = 10\ \mathrm{poise}\).

Please log in or register to report this question.

Answer: A

Shadows are explained by the rectilinear propagation of light.

Light travels in straight lines in a uniform medium, so an opaque body blocks the rays behind it and leaves a dark region of the same outline. The sharpness depends on the source: a point source gives a crisp umbra, an extended source a fuzzy penumbra as well.

Please log in or register to report this question.

297.

Two bulbs are fitted in a room in the domestic electric installation. One of them glows brighter than the other. Then

Answer: A

The brighter bulb has the smaller resistance.

Household bulbs are in parallel, so both have the same voltage across them: \[P = \frac{V^2}{R}\] With \(V\) fixed, power varies inversely with resistance, so the lower-resistance bulb dissipates more and glows brighter. In a series circuit the opposite would hold.

Please log in or register to report this question.

298.

At what temperature do the Fahrenheit and celcius scales give the same reading?

Answer: C

The two scales read alike at −40°.

Setting the readings equal in the conversion formula: \[F = \frac{9}{5}C + 32,\qquad x = \frac{9}{5}x + 32\]

\[-\frac{4}{5}x = 32 \Rightarrow x = -40\]

So −40 °C is the same temperature as −40 °F.

Please log in or register to report this question.

299.

Kilowatt ? hour is a unit of

Answer: A

The kilowatt-hour is a unit of energy.

It is power multiplied by time, so \[1\ \mathrm{kWh} = 1000\ \mathrm{W} \times 3600\ \mathrm{s} = 3.6\times10^{6}\ \mathrm{J}\] The kilowatt is the unit of power; the electricity bill charges for energy consumed, which is why the meter counts kilowatt-hours.

Please log in or register to report this question.

300.

Sound produced at a point is heard by a person after 5 second, while the same sound is heard by another person after 6 seconds. If the speed of sound is 300 m/s, what could be the maximum and minimum

Answer: D

The maximum and minimum separations are 3.3 km and 0.30 km.

The two listeners are at \[d_1 = 300\times5 = 1500\ \mathrm{m},\qquad d_2 = 300\times6 = 1800\ \mathrm{m}\] from the source. They are furthest apart when they lie on opposite sides of it, \(1500+1800 = 3300\ \mathrm{m}\), and closest when they lie on the same side, \(1800-1500 = 300\ \mathrm{m}\).

Please log in or register to report this question.

Loading…
Tags: Physics Questions and Answers || Physics MCQ Questions and Answers || Physics GK Questions and Answers || Physics GK MCQ Questions || Physics Multiple Choice Questions and Answers || Physics GK || GK on Physics || General Awareness / General Knowledge (GK) Questions and Answers || General Awareness / General Knowledge (GK) MCQ Questions and Answers || General Awareness / General Knowledge (GK) GK Questions and Answers || GK on General Awareness / General Knowledge (GK)