Input and Output Questions and Answers

Q: Which of the following is capable of recognizing a pre-specified type of mark by pencil or pen?

Correct answer: OMROptical mark recognition detects the presence or absence of a mark in a predefined position, which is why the forms it reads have printed boxes or lozenges to be filled.It reads position rather than shape, which makes it simple and very reliable - and is why it is used for examination answer sheets, ballot papers and survey forms. Optical character recognition, by contrast, must identify the shapes of characters, a far harder problem. A bar code reader reads bar widths, and Winchester is an old term for a hard disk.

Q: Devices that allow you to put information into the computer.

Correct answer: InputAn input device is the one through which information is put into the machine - keyboard, mouse, scanner, microphone. Output devices deliver results in the opposite direction.

Q: Computer output may consist of

Correct answer: Text, Graphics, Video, and AudioOutput is anything the computer presents to the user, and it takes all four forms - text and graphics on a display or printer, video as moving images, audio through speakers.The other options are all subsets, and each omits something a modern system produces routinely. The breadth is what drove the term "multimedia" and the hardware that supports it: sound cards, graphics processors and high-bandwidth display interfaces all exist because output is not confined to text.

Q: A multifunction Device (MFD) are also called

Correct answer: All-in-one devicesThe two names describe the same product: a single unit combining printing, scanning, copying and often faxing."All-in-one" is the marketing term and "multifunction device" the technical one, and both point at the reason such units exist - the functions share a print engine, a scanning bar and a paper path, so combining them costs far less than separate machines. The device is neither purely input nor purely output, since it performs both.

Q: Which are the input devices that enable direct data entry into a computer system from source documents?

Correct answer: Data Scanning devicesData scanning devices read the source document itself, so the data never has to be transcribed - optical mark readers, optical character readers, bar code readers and magnetic ink character readers all belong to the class.The gain is accuracy as much as speed: manual keying introduces errors at a rate that matters when the volume is large, and reading the original removes that step entirely. The other three options are not established categories.

Q: A touch screen is another type of

Correct answer: Input DeviceA touch screen reports where it was touched, so data flows into the computer and it is an input device - the same category as the mouse and the keyboard.The confusion arises because it is physically combined with a display, which is an output device. The two functions are separate: the panel senses touch and the screen behind it shows the image. Combining them in one assembly is a packaging decision, not a change of category.

Q: What will be the output of the following C code? #include <stdio.h> int main() { int x = -2; x = x >> 1; printf("%d\n", x); }

Correct answer: -1\( -2 \) in two's complement is ...11111110. Right-shifting a signed negative value is implementation-defined, and every common compiler performs an arithmetic shift, propagating the sign bit into the vacated position.That gives ...11111111, which is \( -1 \). The result is also what integer division would give with truncation towards negative infinity, which is why the arithmetic shift is chosen. A logical shift would bring in a zero at the top and give a large positive number instead.

Q: A Laser printer is a

Correct answer: Non-Impact PrinterA laser printer forms the image electrostatically: a laser writes a charge pattern on a drum, toner adheres to it, and heat fuses the toner to the paper. Nothing strikes the page.Impact printers - dot matrix, daisy wheel, line printers - press a type element against a ribbon and the paper, which is what lets them print through carbon copies and what makes them noisy. The distinction explains both the quiet operation and the inability of a laser printer to produce multi-part forms.

Q: The process in which a file is partitioned into smaller parts and different parts are stored in different disks is called _________

Correct answer: StripingStriping divides a file into blocks and writes consecutive blocks to different disks, so several drives transfer at once and the effective throughput multiplies.The cost is reliability: with the data spread across every disk, the failure of any one of them loses the file, so striping alone - RAID 0 - is less reliable than a single drive. Combining it with mirroring or parity restores redundancy, which is what the higher RAID levels do.

A Central Processing Unit (CPU) contains

A.A card reader and a printing device.
B.An analytical engine and a control unit.
C.A control unit and an arithmetic/logic unit.
D.An arithmetic logic unit and a card reader.

Answer: C

Correct answer: A control unit and an arithmetic/logic unit.

The CPU is conventionally described as those two parts. The control unit fetches, decodes and sequences instructions; the arithmetic and logic unit performs the calculations and comparisons.

Registers are usually counted with them, and modern processors add cache and several execution units, but the two-part description remains the standard model. Card readers and printers are peripherals, outside the processor entirely, and "analytical engine" is Babbage's term for a whole machine.

Discuss in Forum

Which of the following is capable of recognizing a pre-specified type of mark by pencil or pen?

A.OMR
B.Winchester
C.Bar code reader
D.Image Scanner

Answer: A

Correct answer: OMR

Optical mark recognition detects the presence or absence of a mark in a predefined position, which is why the forms it reads have printed boxes or lozenges to be filled.

It reads position rather than shape, which makes it simple and very reliable - and is why it is used for examination answer sheets, ballot papers and survey forms. Optical character recognition, by contrast, must identify the shapes of characters, a far harder problem. A bar code reader reads bar widths, and Winchester is an old term for a hard disk.

Discuss in Forum

Devices that allow you to put information into the computer.

A.Input
B.Output
C.Type &nb

Answer: A

Correct answer: Input

An input device is the one through which information is put into the machine - keyboard, mouse, scanner, microphone. Output devices deliver results in the opposite direction.

Discuss in Forum

Computer output may consist of

A.Not Video and Audio
B.Video and Audio
C.Text, Graphics, Video, and Audio
D.Text and Graphics

Answer: C

Correct answer: Text, Graphics, Video, and Audio

Output is anything the computer presents to the user, and it takes all four forms - text and graphics on a display or printer, video as moving images, audio through speakers.

The other options are all subsets, and each omits something a modern system produces routinely. The breadth is what drove the term "multimedia" and the hardware that supports it: sound cards, graphics processors and high-bandwidth display interfaces all exist because output is not confined to text.

Discuss in Forum

A multifunction Device (MFD) are also called

A.All-in-one devices
B.Input Devices
C.Storage Devices
D.Software Applications

Answer: A

Correct answer: All-in-one devices

The two names describe the same product: a single unit combining printing, scanning, copying and often faxing.

"All-in-one" is the marketing term and "multifunction device" the technical one, and both point at the reason such units exist - the functions share a print engine, a scanning bar and a paper path, so combining them costs far less than separate machines. The device is neither purely input nor purely output, since it performs both.

Discuss in Forum

Which are the input devices that enable direct data entry into a computer system from source documents?

A.Data Scanning devices
B.Data retrieving devices
C.Data acquiring devices
D.System Access devices

Answer: A

Correct answer: Data Scanning devices

Data scanning devices read the source document itself, so the data never has to be transcribed - optical mark readers, optical character readers, bar code readers and magnetic ink character readers all belong to the class.

The gain is accuracy as much as speed: manual keying introduces errors at a rate that matters when the volume is large, and reading the original removes that step entirely. The other three options are not established categories.

Discuss in Forum

A touch screen is another type of

A.Input Device
B.System Unit
C.Storage Device
D.Output Device

Answer: A

Correct answer: Input Device

A touch screen reports where it was touched, so data flows into the computer and it is an input device - the same category as the mouse and the keyboard.

The confusion arises because it is physically combined with a display, which is an output device. The two functions are separate: the panel senses touch and the screen behind it shows the image. Combining them in one assembly is a packaging decision, not a change of category.

Discuss in Forum

What will be the output of the following C code?

#include <stdio.h>
    int main()
    {
        int x = -2;
        x = x >> 1;
        printf("%d\n", x);
    }

A.1
B.-1
C.2 - 1 considering int to be 4 bytes
D.Either -1 or 1

Answer: B

Correct answer: -1

\( -2 \) in two's complement is ...11111110. Right-shifting a signed negative value is implementation-defined, and every common compiler performs an arithmetic shift, propagating the sign bit into the vacated position.

That gives ...11111111, which is \( -1 \). The result is also what integer division would give with truncation towards negative infinity, which is why the arithmetic shift is chosen. A logical shift would bring in a zero at the top and give a large positive number instead.

Discuss in Forum

A Laser printer is a

A.Non-Impact Printer
B.Impact Printer

Answer: A

Correct answer: Non-Impact Printer

A laser printer forms the image electrostatically: a laser writes a charge pattern on a drum, toner adheres to it, and heat fuses the toner to the paper. Nothing strikes the page.

Impact printers - dot matrix, daisy wheel, line printers - press a type element against a ribbon and the paper, which is what lets them print through carbon copies and what makes them noisy. The distinction explains both the quiet operation and the inability of a laser printer to produce multi-part forms.

Discuss in Forum

10.

The process in which a file is partitioned into smaller parts and different parts are stored in different disks is called _________

A.RAID
B.Mirroring
C.Striping
D.RAID classification

Answer: C

Correct answer: Striping

Striping divides a file into blocks and writes consecutive blocks to different disks, so several drives transfer at once and the effective throughput multiplies.

The cost is reliability: with the data spread across every disk, the failure of any one of them loses the file, so striping alone - RAID 0 - is less reliable than a single drive. Combining it with mirroring or parity restores redundancy, which is what the higher RAID levels do.

Discuss in Forum

Loading…

Topics

Other Subjects

Tags: Input and Output Questions and Answers || Input and Output MCQ Questions and Answers || Input and Output GK Questions and Answers || Input and Output GK MCQ Questions || Input and Output Multiple Choice Questions and Answers || Input and Output GK || GK on Input and Output || C Programming Questions and Answers || C Programming MCQ Questions and Answers || C Programming GK Questions and Answers || GK on C Programming

Input and Output Questions and Answers

Topics

Other Subjects

About Us

Stay informed about all important Dates & Notifications