Uniform Plane Waves Questions and Answers

Q: An example for lossless propagation is :

Lossless propagation is not practically possible.Lossless propagation requires a perfect conductor and a perfect dielectric: \(\sigma = \infty\) for the guiding walls or \(\sigma = 0\) for the medium. Every real conductor has finite conductivity, so currents in it dissipate power, and every real dielectric has some loss tangent. Lossless lines and guides are useful idealisations for analysis, but some attenuation always occurs in practice.Dielectric waveguides such as optical fibre have very low loss but still attenuate, about 0.2 dB/km at 1,550 nm. Conductor propagation has ohmic loss, and cavity resonators have finite Q because of wall losses.

Q: An example for usage of electromagnetic wave propagation is :

The example is a mobile transponder.A transponder receives a radio signal and automatically transmits a reply, as in mobile phones, RFID tags, aircraft transponders and satellite transponders. Both its reception and its transmission depend on electromagnetic waves travelling through space between antennas.A refrigerator works by a vapour-compression cycle driven by an electric motor. An electric fan is driven by a motor. Relays in actuators are electromagnetic switches operated by current in a coil. These devices use electricity and magnetism but not the propagation of electromagnetic waves.

Q: Copper behaves as a :

Copper behaves as a conductor or dielectric depending on the frequency.Whether a material acts as a conductor or a dielectric depends on the ratio of conduction current to displacement current, \(\sigma/\omega\varepsilon\). For copper, \(\sigma \approx 5.8 \times 10^{7}\) S/m, so this ratio is enormous at all ordinary frequencies and copper is a good conductor. At extremely high frequencies, in the far ultraviolet and X-ray range, the ratio falls and copper behaves more like a dielectric, becoming partly transparent.So copper is not a conductor 'always'. The classification depends on frequency, not on the applied field strength or the current density, since \(\sigma\) and \(\varepsilon\) do not change with these in ordinary conditions.

Q: The wavelength for a frequency of 25 MHz is :

The wavelength is 12 metres.For an electromagnetic wave in free space, wavelength is the speed of light divided by frequency:\[ \begin{aligned} \lambda &= \frac{c}{f} = \frac{3 \times 10^{8}}{25 \times 10^{6}} \\ &= 12\ \text{m} \end{aligned} \]15 m would correspond to 20 MHz, 4 m to 75 MHz and 32 m to about 9.4 MHz. Only 12 m fits 25 MHz, a frequency in the HF band.

Q: Which of the following electric field and magnetic field represent a propagating electromagnetic wave ? (\(\hat{k}\) is a unit vector in the direction of the propagation).

The pair that represents a propagating wave is the Gaussian-shaped pulse in \(\hat{k}\cdot\vec{r} - ct\), with \(\vec{B} = \hat{k}\times\vec{E}/c\).A travelling wave in vacuum is any function of the single combination \(\hat{k}\cdot\vec{r} - ct\), so it moves along \(\hat{k}\) at speed \(c\) without changing shape, and its magnetic field is \(\vec{B} = \hat{k}\times\vec{E}/c\), perpendicular to both \(\vec{E}\) and \(\hat{k}\). The pulse in the keyed option has exactly this form (it need not be sinusoidal).The others fail. A wave with \(\vec{B} = 0\) cannot satisfy Faraday's law, since a changing \(\vec{E}\) needs a \(\vec{B}\). The product \(\sin(\hat{k}\cdot\vec{r})\cos(ct)\) is a standing wave, which does not propagate. The last option's \(\vec{E}\) is not a function of \(\hat{k}\cdot\vec{r} - ct\) alone, because of the extra factor \(\hat{k}\cdot\vec{r}\), and its \(\vec{B}\) is not \(\hat{k}\times\vec{E}/c\).

Q: For plane monochromatic electromagnetic wave incident from a denser medium onto a rarer medium (refractive indices of the media are \(n_{1}\) and \(n_{2}\) respectively), the Brewster's angle and the critical angle are denoted by \(\theta_{B}\) and \(\theta_{C}\) respectively. Which of the following statements is correct ?

The correct statement is \(\theta_{B} \lt \theta_{C}\).For light going from medium 1 (index \(n_{1}\)) into the rarer medium 2:\[ \begin{aligned} \tan\theta_{B} &= n_{2}/n_{1} \\ \sin\theta_{C} &= n_{2}/n_{1} \end{aligned} \]Both equal the same number less than 1. For any acute angle \(\tan\theta \gt \sin\theta\), so reaching the same value needs a smaller angle for the tangent: \(\theta_{B} \lt \theta_{C}\). This makes sense physically, because Brewster reflection needs a transmitted beam, which exists only below the critical angle.The formulas \(\tan\theta_{B} = n_{1}/n_{2}\) and \(\sin\theta_{C} = n_{1}/n_{2}\) have the ratio upside down; the second is impossible since \(n_{1}/n_{2} \gt 1\). That also rules out \(\theta_{B} \gt \theta_{C}\).

Q: Consider a rectangular wave guide with dimensions 2.28 cm × 1.01 cm. What TE modes will propagate, if the driving frequency is 17 GHz ? And, to excite only one TE mode, what range of frequencies could be used ?

The single-mode range is 6.6 GHz to 13.2 GHz.The cutoff frequencies of a rectangular guide with sides \(a = 2.28\) cm and \(b = 1.01\) cm are\[ \begin{aligned} \nu_{mn} &= \frac{c}{2}\sqrt{\frac{m^{2}}{a^{2}} + \frac{n^{2}}{b^{2}}} \\ \nu_{10} &= \frac{3 \times 10^{10}}{2 \times 2.28} = 6.58\ \text{GHz} \\ \nu_{20} &= 13.2\ \text{GHz}, \quad \nu_{01} = 14.9\ \text{GHz} \end{aligned} \]and \(\nu_{11} \approx 16.2\) GHz. At 17 GHz the TE10, TE20, TE01 and TE11 modes all propagate. Only TE10 propagates between its own cutoff and the next one, so the single-mode band is about 6.6 GHz to 13.2 GHz.3.3 to 6.6 GHz lies below the lowest cutoff, where nothing propagates; 1.62 to 6.6 GHz is also below cutoff; and 66 to 132 GHz is ten times too high and full of higher modes.

111.

An example for lossless propagation is :

A.Dielectric waveguide propagation
B.Conductor propagation
C.Cavity resonator propagation
D.Not practically possible

Exam Year(s)

MH SET - 2025, SET Exam - 2025,

Answer: D

Lossless propagation is not practically possible.

Lossless propagation requires a perfect conductor and a perfect dielectric: \(\sigma = \infty\) for the guiding walls or \(\sigma = 0\) for the medium. Every real conductor has finite conductivity, so currents in it dissipate power, and every real dielectric has some loss tangent. Lossless lines and guides are useful idealisations for analysis, but some attenuation always occurs in practice.

Dielectric waveguides such as optical fibre have very low loss but still attenuate, about 0.2 dB/km at 1,550 nm. Conductor propagation has ohmic loss, and cavity resonators have finite Q because of wall losses.

Discuss in Forum

112.

An example for usage of electromagnetic wave propagation is :

A.refrigerator
B.electric fan
C.mobile transponder
D.relays in actuators

Exam Year(s)

MH SET - 2025, SET Exam - 2025,

Answer: C

The example is a mobile transponder.

A transponder receives a radio signal and automatically transmits a reply, as in mobile phones, RFID tags, aircraft transponders and satellite transponders. Both its reception and its transmission depend on electromagnetic waves travelling through space between antennas.

A refrigerator works by a vapour-compression cycle driven by an electric motor. An electric fan is driven by a motor. Relays in actuators are electromagnetic switches operated by current in a coil. These devices use electricity and magnetism but not the propagation of electromagnetic waves.

Discuss in Forum

113.

Copper behaves as a :

A.Conductor always
B.Conductor or dielectric depending on the applied electric field strength
C.Conductor or dielectric depending on the frequency
D.Conductor or dielectric depending on the electric current density

Exam Year(s)

MH SET - 2025, SET Exam - 2025,

Answer: A

Copper behaves as a conductor or dielectric depending on the frequency.

Whether a material acts as a conductor or a dielectric depends on the ratio of conduction current to displacement current, \(\sigma/\omega\varepsilon\). For copper, \(\sigma \approx 5.8 \times 10^{7}\) S/m, so this ratio is enormous at all ordinary frequencies and copper is a good conductor. At extremely high frequencies, in the far ultraviolet and X-ray range, the ratio falls and copper behaves more like a dielectric, becoming partly transparent.

So copper is not a conductor 'always'. The classification depends on frequency, not on the applied field strength or the current density, since \(\sigma\) and \(\varepsilon\) do not change with these in ordinary conditions.

Discuss in Forum

114.

The wavelength for a frequency of 25 MHz is :

A.15 metres
B.4 metres
C.12 metres
D.32 metres

Exam Year(s)

MH SET - 2025, SET Exam - 2025,

Answer: C

The wavelength is 12 metres.

For an electromagnetic wave in free space, wavelength is the speed of light divided by frequency:

\[ \begin{aligned} \lambda &= \frac{c}{f} = \frac{3 \times 10^{8}}{25 \times 10^{6}} \\ &= 12\ \text{m} \end{aligned} \]

15 m would correspond to 20 MHz, 4 m to 75 MHz and 32 m to about 9.4 MHz. Only 12 m fits 25 MHz, a frequency in the HF band.

Discuss in Forum

115.

Which of the following electric field and magnetic field represent a propagating electromagnetic wave ? (\(\hat{k}\) is a unit vector in the direction of the propagation).

A.\(\vec{E} = \vec{E_{0}}(\hat{k}\cdot\vec{r} - ct)^{2}\) \(e^{-(\hat{k}.\vec{r} - ct)^{2}}\), \(\vec{B} = \hat{k} \times \frac{\vec{E_{0}}}{c}(\hat{k}\cdot\vec{r} - ct)^{2}\) \(e^{-(\hat{k}.\vec{r} - ct)^{2}}\)
B.\(\vec{E} = \vec{E_{0}}\sin(\hat{k}\cdot\vec{r} - ct), \vec{B} = \vec{0}\)
C.\(\vec{E} = \vec{E_{0}}\sin(\hat{k}\cdot\vec{r})\cos(ct)\), \(\vec{B} = \hat{k} \times \frac{\vec{E_{0}}}{c}\sin(\hat{k}\cdot\vec{r})\cos(ct)\)
D.\(\vec{E} = (\hat{k}\cdot\vec{r})e^{-i(\hat{k}.\vec{r} - ct)}\), \(\vec{B} = \frac{\vec{E_{0}}}{c}(\hat{k}\cdot\vec{r})e^{-i(\hat{k}.\vec{r} - ct)}\)

Exam Year(s)

MH SET - 2025, SET Exam - 2025,

Answer: A

The pair that represents a propagating wave is the Gaussian-shaped pulse in \(\hat{k}\cdot\vec{r} - ct\), with \(\vec{B} = \hat{k}\times\vec{E}/c\).

A travelling wave in vacuum is any function of the single combination \(\hat{k}\cdot\vec{r} - ct\), so it moves along \(\hat{k}\) at speed \(c\) without changing shape, and its magnetic field is \(\vec{B} = \hat{k}\times\vec{E}/c\), perpendicular to both \(\vec{E}\) and \(\hat{k}\). The pulse in the keyed option has exactly this form (it need not be sinusoidal).

The others fail. A wave with \(\vec{B} = 0\) cannot satisfy Faraday's law, since a changing \(\vec{E}\) needs a \(\vec{B}\). The product \(\sin(\hat{k}\cdot\vec{r})\cos(ct)\) is a standing wave, which does not propagate. The last option's \(\vec{E}\) is not a function of \(\hat{k}\cdot\vec{r} - ct\) alone, because of the extra factor \(\hat{k}\cdot\vec{r}\), and its \(\vec{B}\) is not \(\hat{k}\times\vec{E}/c\).

Discuss in Forum

116.

For plane monochromatic electromagnetic wave incident from a denser medium onto a rarer medium (refractive indices of the media are \(n_{1}\) and \(n_{2}\) respectively), the Brewster's angle and the critical angle are denoted by \(\theta_{B}\) and \(\theta_{C}\) respectively. Which of the following statements is correct ?

A.\(\tan\theta_{B} = \frac{n_{1}}{n_{2}}\)
B.\(\sin\theta_{C} = \frac{n_{1}}{n_{2}}\)
C.\(\theta_{B} \lt \theta_{C}\)
D.\(\theta_{B} \gt \theta_{C}\)

Exam Year(s)

MH SET - 2025, SET Exam - 2025,

Answer: C

The correct statement is \(\theta_{B} \lt \theta_{C}\).

For light going from medium 1 (index \(n_{1}\)) into the rarer medium 2:

\[ \begin{aligned} \tan\theta_{B} &= n_{2}/n_{1} \\ \sin\theta_{C} &= n_{2}/n_{1} \end{aligned} \]

Both equal the same number less than 1. For any acute angle \(\tan\theta \gt \sin\theta\), so reaching the same value needs a smaller angle for the tangent: \(\theta_{B} \lt \theta_{C}\). This makes sense physically, because Brewster reflection needs a transmitted beam, which exists only below the critical angle.

The formulas \(\tan\theta_{B} = n_{1}/n_{2}\) and \(\sin\theta_{C} = n_{1}/n_{2}\) have the ratio upside down; the second is impossible since \(n_{1}/n_{2} \gt 1\). That also rules out \(\theta_{B} \gt \theta_{C}\).

Discuss in Forum

117.

Consider a rectangular wave guide with dimensions 2.28 cm × 1.01 cm. What TE modes will propagate, if the driving frequency is 17 GHz ? And, to excite only one TE mode, what range of frequencies could be used ?

A.\(3.3\,GHz \le \vartheta \lt 6.6\,GHz\)
B.\(6.6\,GHz \le \vartheta \lt 13.2\,GHz\)
C.\(66\,GHz \lt \vartheta \le 132\,GHz\)
D.\(1.62\,GHz \le \vartheta \lt 6.6\,GHz\)

Exam Year(s)

MH SET - 2025, SET Exam - 2025,

Answer: B

The single-mode range is 6.6 GHz to 13.2 GHz.

The cutoff frequencies of a rectangular guide with sides \(a = 2.28\) cm and \(b = 1.01\) cm are

\[ \begin{aligned} \nu_{mn} &= \frac{c}{2}\sqrt{\frac{m^{2}}{a^{2}} + \frac{n^{2}}{b^{2}}} \\ \nu_{10} &= \frac{3 \times 10^{10}}{2 \times 2.28} = 6.58\ \text{GHz} \\ \nu_{20} &= 13.2\ \text{GHz}, \quad \nu_{01} = 14.9\ \text{GHz} \end{aligned} \]

and \(\nu_{11} \approx 16.2\) GHz. At 17 GHz the TE10, TE20, TE01 and TE11 modes all propagate. Only TE10 propagates between its own cutoff and the next one, so the single-mode band is about 6.6 GHz to 13.2 GHz.

3.3 to 6.6 GHz lies below the lowest cutoff, where nothing propagates; 1.62 to 6.6 GHz is also below cutoff; and 66 to 132 GHz is ten times too high and full of higher modes.

Discuss in Forum

Loading…

Topics

Other Subjects

Tags: Uniform Plane Waves Questions and Answers || Uniform Plane Waves MCQ Questions and Answers || Uniform Plane Waves GK Questions and Answers || Uniform Plane Waves GK MCQ Questions || Uniform Plane Waves Multiple Choice Questions and Answers || Uniform Plane Waves GK || GK on Uniform Plane Waves || Electromagnetic Field Theory Questions and Answers || Electromagnetic Field Theory MCQ Questions and Answers || Electromagnetic Field Theory GK Questions and Answers || GK on Electromagnetic Field Theory

Uniform Plane Waves Questions and Answers

Topics

Other Subjects

About Us

Stay informed about all important Dates & Notifications