Test Case Design Techniques Questions and Answers

Q: Cyclomatic complexity measures

Cyclomatic complexity measures the number of independent logical paths in a program.Thomas McCabe's metric is computed from the program's control flow graph as \(V(G) = E - N + 2\), where E is the number of edges and N the number of nodes, or simply as the number of decision points plus one. It gives the number of linearly independent paths, and so the minimum number of test cases needed to cover every branch.It says nothing about the number of lines of code (that is the LOC measure), memory use or execution time.

Q: Which of the following is the method of black box testing ?

The black box method is Boundary value analysis.Black box testing designs tests from the specification without looking at the code. Boundary value analysis does this by testing at and just around the edges of input ranges (for a valid range of 1 to 100: 0, 1, 2, 99, 100 and 101), where errors are most common.Basis path testing and code path testing derive tests from the program's control flow, so they are white box methods. As boundary value analysis fits, 'None of these' is wrong.

11.

Cyclomatic complexity measures

A.Total number of lines present in the program code
B.Number of independent logical paths in a program
C.Amount of memory consumed during program execution
D.Total execution time taken by the program code

Exam Year(s)

Tripura Public Service Commission - 2026,

Answer: B

Cyclomatic complexity measures the number of independent logical paths in a program.

Thomas McCabe's metric is computed from the program's control flow graph as \(V(G) = E - N + 2\), where E is the number of edges and N the number of nodes, or simply as the number of decision points plus one. It gives the number of linearly independent paths, and so the minimum number of test cases needed to cover every branch.

It says nothing about the number of lines of code (that is the LOC measure), memory use or execution time.

Discuss in Forum

12.

Which of the following is the method of black box testing ?

A.Boundary value analysis
B.Basic path testing
C.Code path testing
D.None of these.

Exam Year(s)

Tripura Public Service Commission - 2026,

Answer: A

The black box method is Boundary value analysis.

Black box testing designs tests from the specification without looking at the code. Boundary value analysis does this by testing at and just around the edges of input ranges (for a valid range of 1 to 100: 0, 1, 2, 99, 100 and 101), where errors are most common.

Basis path testing and code path testing derive tests from the program's control flow, so they are white box methods. As boundary value analysis fits, 'None of these' is wrong.

Discuss in Forum

13.

Basis path testing falls under

A.system testing
B.white box testing
C.black box testing
D.unit testing

Exam Year(s)

UGC NET - 2012,

Answer: B

Basis path testing belongs to white box testing. It uses the control flow graph of the code, computes the cyclomatic complexity, and designs test cases to execute each independent path of the program, so the tester must know the internal structure.

Black box testing looks only at inputs and outputs, system testing is done on the whole system, and unit testing is a level of testing and is not the same as a technique. The basis path method is a white box technique, usually used at the unit level.

Discuss in Forum

14.

Which one of the following statements is incorrect ?

A.The number of regions corresponds to the cyclomatic complexity.
B.Cyclometric complexity for a flow graph G is V(G) = N - E + 2, where E is the number of edges and N is the number of nodes in the flow graph.
C.Cyclometric complexity for a flow graph G is V(G) = E - N + 2, where E is the number of edges & N is the number of nodes in the flow graph.
D.Cyclometric complexity for a flow graph G is V(G) = P + 1, where P is the number of predicate nodes contained in the flow graph G.

Exam Year(s)

UGC NET - 2012,

Answer: B

For a flow graph, cyclomatic complexity is V(G) = E - N + 2, with E the number of edges and N the number of nodes. It is also P + 1, with P the number of predicate nodes, and it equals the number of regions of the graph. So statements (A), (C) and (D) are correct. Statement (B) gives V(G) = N - E + 2, with the terms reversed, which would be negative for most graphs, so it is the incorrect statement. The answer is option (B).

Discuss in Forum

15.

Consider the following pseudo-code :

If (A > B) and (C > D) then
    A = A + 1
    B = B + 1
Endif

The cyclomatic complexity of the pseudo-code is

Exam Year(s)

UGC NET - 2012,

Answer: B

The cyclomatic complexity of a piece of code is the number of decisions plus one. The pseudo-code has a single if statement whose condition is made of two simple conditions joined by 'and', and each simple condition counts as a decision, so there are two predicates and the complexity is 2 + 1 = 3, option (B). Counting only the whole if as one decision would give 2, and the larger values count decisions that are not there.

Discuss in Forum

16.

Given a flow graph with 10 nodes, 13 edges and one connected components, the number of regions and the number of predicate (decision) nodes in the flow graph will be

A.4, 5
B.5, 4
C.3, 1
D.13, 8

Exam Year(s)

UGC NET - 2013,

Answer: B

The flow graph has 5 regions and 4 predicate nodes, which is option B. Cyclomatic complexity gives the number of regions as \(V(G) = E - N + 2P\), with E = 13 edges, N = 10 nodes and P = 1 connected component.

\[ V(G) = 13 - 10 + 2 = 5 \]

The number of predicate (decision) nodes is one fewer than the cyclomatic complexity, \(V(G) - 1 = 4\). The pair 4, 5 reverses the two values, and 3, 1 and 13, 8 do not satisfy either formula.

Discuss in Forum

17.

One weakness of boundary value analysis and equivalence partitioning is

A.they are not effective.
B.they do not explore combinations of input circumstances.
C.they explore combinations of input circumstances.
D.none of the above.

Exam Year(s)

UGC NET - 2013,

Answer: B

The weakness of boundary value analysis and equivalence partitioning is that they do not explore combinations of input circumstances. Each technique picks test values for individual inputs, at the edges of or within a class, so interactions between several inputs are left untested. Techniques such as cause-effect graphing and decision tables were introduced for that gap.

The claim that they are not effective is false, since both are widely used and productive. The option saying they do explore combinations states the opposite of the weakness.

Discuss in Forum

18.

Cyclometric complexity of a flow graph G with n vertices and e edges is

A.\(V(G) = e+n-2\)
B.\(V(G) = e-n+2\)
C.\(V(G) = e+n+2\)
D.\(V(G) = e-n-2\)

Exam Year(s)

UGC NET - 2013,

Answer: B

The cyclomatic complexity of a flow graph G with e edges and n vertices is V(G) = e - n + 2, option (B). It equals the number of linearly independent paths through the program and is the minimum number of test cases needed to cover every independent path. For example, a single decision gives a graph with 4 nodes and 4 edges, so 4 - 4 + 2 = 2 paths. The general formula for a graph with p connected components is e - n + 2p, and a single procedure has p = 1. The forms e+n-2, e+n+2 and e-n-2 give wrong values, for instance e+n-2 would give 6 for the one decision graph, which is more than its 2 paths.

Discuss in Forum

19.

Equivalence partitioning is a __________ method that divides the input domain of a program into classes of data from which test cases can be derived.

A.White-box testing
B.Black-box testing
C.Orthogonal array testing
D.Stress testing

Exam Year(s)

UGC NET - 2013,

Answer: B

Equivalence partitioning is a black-box testing method that divides the input domain of a program into classes of data from which test cases can be derived. A class is a set of inputs that the program should treat in the same way, so one representative of each class is tested.

White-box testing works from the internal structure of the code, orthogonal array testing is a technique for choosing combinations of inputs, and stress testing pushes the system beyond its normal load. The method that works from the input classes alone is black-box testing, which is (B).

Discuss in Forum

Loading…

Topics

Other Subjects

Tags: Test Case Design Techniques Questions and Answers || Test Case Design Techniques MCQ Questions and Answers || Test Case Design Techniques GK Questions and Answers || Test Case Design Techniques GK MCQ Questions || Test Case Design Techniques Multiple Choice Questions and Answers || Test Case Design Techniques GK || GK on Test Case Design Techniques || Software Engineering Questions and Answers || Software Engineering MCQ Questions and Answers || Software Engineering GK Questions and Answers || GK on Software Engineering

Test Case Design Techniques Questions and Answers

Topics

Other Subjects

About Us

Stay informed about all important Dates & Notifications