Field Effect Transistors Questions and Answers

Q: In, ................. device the conductivity of a layer of a semiconductor is modulated by a transverse electric field.

The device is the FET.In a field-effect transistor the current flows through a channel, a thin layer of semiconductor, and the voltage on the gate sets up an electric field across (transverse to) that channel. The field changes the number of carriers in the channel, and so its conductivity, which is how the gate controls the drain current. The name 'field effect' comes from this mechanism.A BJT is controlled by the injection of carriers across forward-biased junctions, with base current, not by a transverse field. A P-N diode and a Zener diode are two-terminal devices with no control electrode at all.

Q: What does the symbol IGSS represent in the context of a JFET ?

IGSS is the gate current when the gate-source junction is reverse-biased.In a JFET the gate-channel p-n junction is always operated in reverse bias. IGSS, the gate reverse current or gate leakage current, is the small current that flows into the gate with the drain shorted to the source and a specified reverse voltage applied between gate and source. It is typically in nanoamperes, which is why a JFET has a very high input resistance.The drain current is ID (with IDSS its value at VGS = 0). The gate-source voltage is VGS. Forward-biasing the gate junction is avoided in normal operation and is not what IGSS specifies.

Q: Which of the following is true about the FET as its advantage ?

The advantage is better thermal stability.In a FET, current is carried by majority carriers only, and their mobility falls as temperature rises, so the drain current tends to decrease with heating. This negative temperature coefficient prevents thermal runaway, which can destroy a bipolar transistor. FETs also offer very high input resistance, low noise and small size.A low input resistance is the opposite of the FET's main advantage, which is its very high input resistance, especially in MOSFETs. 'Big size, small life' is false, since FETs are compact and reliable. High output resistance is not usually listed as the FET's advantage over the BJT.

Q: The co-ordinates of the operating point (Q) for the following JFET circuit are ........

The operating point is \(V_{DS} = 15\) V, \(I_{D} = 5\) mA.The divider sets the gate voltage, and the source voltage is taken to sit at about the gate voltage (that is, \(V_{GS} \approx 0\), the approximation the options are built on):\[ \begin{aligned} V_{G} &= 30 \times \frac{1\ \text{M}\Omega}{3\ \text{M}\Omega} = 10\ \text{V} \\ I_{D} &\approx \frac{V_{G}}{R_{s}} = \frac{10\ \text{V}}{2\ \text{k}\Omega} = 5\ \text{mA} \\ V_{DS} &= 30 - 5\ \text{mA}(1 + 2)\ \text{k}\Omega = 15\ \text{V} \end{aligned} \]The other options put \(V_{DS}\) in millivolts. With 5 mA the two resistors drop only 15 V, which leaves 15 V, not 15 mV, across the transistor. Currents of 15 mA or 10 mA through the 3 kΩ of \(R_{D}\) and \(R_{s}\) would need 45 V or 30 V, more than or all of the supply, and are inconsistent with a 10 V gate.

Q: The drain current in a JFET is controlled by

The drain current in a JFET is controlled by the gate-source voltage.The JFET is a voltage-controlled device. A reverse bias on the gate-source junction widens the depletion region into the channel, narrowing it and reducing the drain current. Shockley's equation gives the relation:\[ I_D = I_{DSS}\left(1 - \frac{V_{GS}}{V_P}\right)^{2} \]The gate is reverse biased, so gate current is almost zero and controls nothing. In saturation the drain voltage has little effect on the current. Source current is simply the drain current flowing out, a result rather than a control.

111.

In, ................. device the conductivity of a layer of a semiconductor is modulated by a transverse electric field.

A.BJT
B.P-N diode
C.Zener diode
D.FET

Exam Year(s)

MH SET - 2023, SET Exam - 2023,

Answer: D

The device is the FET.

In a field-effect transistor the current flows through a channel, a thin layer of semiconductor, and the voltage on the gate sets up an electric field across (transverse to) that channel. The field changes the number of carriers in the channel, and so its conductivity, which is how the gate controls the drain current. The name 'field effect' comes from this mechanism.

A BJT is controlled by the injection of carriers across forward-biased junctions, with base current, not by a transverse field. A P-N diode and a Zener diode are two-terminal devices with no control electrode at all.

Discuss in Forum

112.

What does the symbol I_GSS represent in the context of a JFET ?

A.Drain current
B.Gate-source voltage
C.Gate current when the gate-source junction is forward-biased
D.Gate current when the gate-source junction is reverse-biased

Exam Year(s)

MH SET - 2025, SET Exam - 2025,

Answer: D

I_GSS is the gate current when the gate-source junction is reverse-biased.

In a JFET the gate-channel p-n junction is always operated in reverse bias. I_GSS, the gate reverse current or gate leakage current, is the small current that flows into the gate with the drain shorted to the source and a specified reverse voltage applied between gate and source. It is typically in nanoamperes, which is why a JFET has a very high input resistance.

The drain current is I_D (with I_DSS its value at V_GS = 0). The gate-source voltage is V_GS. Forward-biasing the gate junction is avoided in normal operation and is not what I_GSS specifies.

Discuss in Forum

113.

Which of the following is true about the FET as its advantage ?

A.Low input resistance
B.High output resistance
C.Big size, small life
D.Better thermal stability

Exam Year(s)

MH SET - 2025, SET Exam - 2025,

Answer: D

The advantage is better thermal stability.

In a FET, current is carried by majority carriers only, and their mobility falls as temperature rises, so the drain current tends to decrease with heating. This negative temperature coefficient prevents thermal runaway, which can destroy a bipolar transistor. FETs also offer very high input resistance, low noise and small size.

A low input resistance is the opposite of the FET's main advantage, which is its very high input resistance, especially in MOSFETs. 'Big size, small life' is false, since FETs are compact and reliable. High output resistance is not usually listed as the FET's advantage over the BJT.

Discuss in Forum

114.

The co-ordinates of the operating point (Q) for the following JFET circuit are ........

JFET circuit: VDD = +30 V; R1 = 2 megohm from VDD to the gate and R2 = 1 megohm from the gate to ground; drain to VDD through RD = 1 kilohm; source to ground through Rs = 2 kilohm

A.\(V_{DS}\) = 15 mV, \(I_{D}\) = 5 mA.
B.\(V_{DS}\) = 5 mV, \(I_{D}\) = 15 mA.
C.\(V_{DS}\) = 30 mV, \(I_{D}\) = 10 mA.
D.\(V_{DS}\) = 15 V, \(I_{D}\) = 5 mA.

Exam Year(s)

MH SET - 2025, SET Exam - 2025,

Answer: D

The operating point is \(V_{DS} = 15\) V, \(I_{D} = 5\) mA.

The divider sets the gate voltage, and the source voltage is taken to sit at about the gate voltage (that is, \(V_{GS} \approx 0\), the approximation the options are built on):

\[ \begin{aligned} V_{G} &= 30 \times \frac{1\ \text{M}\Omega}{3\ \text{M}\Omega} = 10\ \text{V} \\ I_{D} &\approx \frac{V_{G}}{R_{s}} = \frac{10\ \text{V}}{2\ \text{k}\Omega} = 5\ \text{mA} \\ V_{DS} &= 30 - 5\ \text{mA}(1 + 2)\ \text{k}\Omega = 15\ \text{V} \end{aligned} \]

The other options put \(V_{DS}\) in millivolts. With 5 mA the two resistors drop only 15 V, which leaves 15 V, not 15 mV, across the transistor. Currents of 15 mA or 10 mA through the 3 kΩ of \(R_{D}\) and \(R_{s}\) would need 45 V or 30 V, more than or all of the supply, and are inconsistent with a 10 V gate.

Discuss in Forum

115.

The drain current in a JFET is controlled by

A.Drain voltage
B.Gate-source voltage
C.Source current
D.Gate current

Exam Year(s)

Tripura Public Service Commission - 2026,

Answer: B

The drain current in a JFET is controlled by the gate-source voltage.

The JFET is a voltage-controlled device. A reverse bias on the gate-source junction widens the depletion region into the channel, narrowing it and reducing the drain current. Shockley's equation gives the relation:

\[ I_D = I_{DSS}\left(1 - \frac{V_{GS}}{V_P}\right)^{2} \]

The gate is reverse biased, so gate current is almost zero and controls nothing. In saturation the drain voltage has little effect on the current. Source current is simply the drain current flowing out, a result rather than a control.

Discuss in Forum

Loading…

Topics

Other Subjects

Tags: Field Effect Transistors Questions and Answers || Field Effect Transistors MCQ Questions and Answers || Field Effect Transistors GK Questions and Answers || Field Effect Transistors GK MCQ Questions || Field Effect Transistors Multiple Choice Questions and Answers || Field Effect Transistors GK || GK on Field Effect Transistors || Analog Electronics Questions and Answers || Analog Electronics MCQ Questions and Answers || Analog Electronics GK Questions and Answers || GK on Analog Electronics

Field Effect Transistors Questions and Answers

Topics

Other Subjects

About Us

Stay informed about all important Dates & Notifications