Machine-translated by Google. Questions are authored in English.
Top

Propulsion System Classification Questions and Answers

71.

Approximate thrust lapse with altitude.

Altitude (ft)Density ratioThrust by density scalingTypical actual thrust
Sea level1.00100 per cent100 per cent
10 0000.7474 per cent78 per cent
20 0000.5353 per cent58 per cent
35 0000.3131 per cent36 per cent

Why does the actual thrust exceed the density scaling at every altitude?

Answer: C

Mass flow follows density almost directly, but the colder air raises the achievable pressure ratio and cycle efficiency. The two effects oppose each other, which makes a simple density scaling conservative rather than wrong.

Please log in or register to report this question.

72.

Efficiency contributions for two engines.

EngineThermal efficiencyPropulsive efficiencyOverall
Turbojet at Mach 0.80.450.550.248
High bypass turbofan0.450.750.338
Turboprop at 300 kt0.400.850.340
Turbojet at Mach 2.00.500.800.400

What do the second and third rows together show?

Answer: D

The turboprop has the poorer core yet matches the turbofan overall, because it accelerates far more air far more gently. Since the two efficiencies multiply, an advantage in one can genuinely compensate for a deficit in the other.

Please log in or register to report this question.

73.

Propulsion types and where each can operate.

TypeWorks at restWorks at Mach 5Works outside the atmosphere
TurbofanYesNoNo
RamjetNoYesNo
ScramjetNoYesNo
RocketYesYesYes

What does the table imply about a vehicle intended to reach orbit from a runway?

Answer: A

Correct answer: More than one type is needed

Read the table down the columns. Only the rocket works at rest, at Mach 5 and outside the atmosphere, but a rocket must carry its own oxidiser for the whole ascent, which is what makes single-stage runway-to-orbit so hard. The air breathers each cover part of the range and none covers it all, so a runway-launched orbital vehicle needs a combined-cycle or staged arrangement - turbine to accelerate from rest, ram or scramjet through the atmosphere, and rocket beyond it.

Please log in or register to report this question.

74.

Assertion (A): A high bypass turbofan is preferred to a turbojet for subsonic transport.

Reason (R): Accelerating more air more gently gives higher propulsive efficiency at subsonic speeds.

Select the correct answer from the options below.

Answer: B

Both statements are true and the second is the reason. The turbojet's large velocity difference wastes energy in the jet at those speeds, which is why the turbofan displaced it on essentially every transport aircraft built since the nineteen sixties.

Please log in or register to report this question.

75.

Assertion (A): A ramjet must be accelerated to speed before it will operate.

Reason (R): It depends entirely on forward motion to compress the incoming air.

Select the correct answer from the options below.

Answer: C

Both hold and the second is the reason it produces no thrust at rest. Having no compressor makes it mechanically simple and capable of very high speeds, but it cannot start itself from a standstill under any circumstances.

Please log in or register to report this question.

76.

Assertion (A): Overall efficiency cannot be improved by thermal efficiency alone.

Reason (R): Overall efficiency is the product of thermal and propulsive efficiency.

Select the correct answer from the options below.

Answer: D

Correct answer: Both A and R are true, and R is the correct explanation of A

Both are true and the reason is the whole argument. Because \( \eta_o = \eta_{th}\,\eta_p \), a gain in one factor can be cancelled by a loss in the other. Raising the turbine entry temperature improves the thermal efficiency but also raises the jet velocity, which lowers the propulsive efficiency - so the two must be pursued together, and the bypass ratio is the lever that restores the second.

Please log in or register to report this question.

77.

Assertion (A): A rocket's thrust does not fall with altitude.

Reason (R): It takes in no atmospheric air and carries its own oxidiser.

Select the correct answer from the options below.

Answer: A

Both statements are true and the second is the reason. With no intake there is no density term and no flight speed term in the thrust equation, which is exactly what makes the rocket usable outside the atmosphere altogether.

Please log in or register to report this question.

78.

Assertion (A): A high bypass engine must be physically larger for a given thrust.

Reason (R): Raising the bypass ratio lowers the specific thrust.

Select the correct answer from the options below.

Answer: B

Correct answer: Both A and R are true, and R is the correct explanation of A

Both are true and the reason is the cause. Specific thrust is thrust per unit mass flow, so lowering it means more air is needed for the same thrust, and more air means a larger fan and a larger nacelle. That is the price of the high bypass ratio - more weight, more drag and more ground clearance trouble, all accepted for the fuel saving.

Please log in or register to report this question.

79.

Assertion (A): A propeller becomes unsuitable above roughly four hundred knots.

Reason (R): Blade tip speed combines rotational and forward velocity and reaches sonic conditions first.

Select the correct answer from the options below.

Answer: C

Correct answer: Both A and R are true, and R is the correct explanation of A

Both are true and the reason gives the mechanism. The tip sees the vector sum of the rotational and forward velocities, so it reaches sonic conditions well before the aircraft does. Once it does, compressibility losses and noise rise sharply and the propeller’s efficiency collapses, which is what sets the practical ceiling of around four hundred knots for a conventional propeller.

Please log in or register to report this question.

80.

Assertion (A): Propulsive efficiency should always be maximised regardless of other considerations.

Reason (R): It approaches unity as the jet velocity approaches the flight velocity.

Select the correct answer from the options below.

Answer: D

The reason is true but it undermines the assertion rather than supporting it. At that condition the velocity increment and therefore the thrust are zero, so a practical cycle deliberately accepts some inefficiency to produce useful thrust.

Please log in or register to report this question.

Loading…
Tags: Propulsion System Classification Questions and Answers || Propulsion System Classification MCQ Questions and Answers || Propulsion System Classification GK Questions and Answers || Propulsion System Classification GK MCQ Questions || Propulsion System Classification Multiple Choice Questions and Answers || Propulsion System Classification GK || GK on Propulsion System Classification || Aircraft Propulsion Questions and Answers || Aircraft Propulsion MCQ Questions and Answers || Aircraft Propulsion GK Questions and Answers || GK on Aircraft Propulsion