Configuration Management Questions and Answers

Q: Select the components from the following which contributes in the building of software configuration management (SCM) :(i) Software configuration identification (SCI)(ii) Change control(iii) Configuration status accounting(iv) Configuration audit

All four contribute, so the answer is (i), (ii), (iii) and (iv).Software configuration management rests on identifying the configuration items, the work products to be controlled (i); controlling changes to them through a formal change-control process (ii); recording and reporting the status of each item and change, configuration status accounting (iii); and auditing that the configuration actually matches its documentation and that approved changes were made correctly (iv). These are the classic SCM functions.Each of the other options leaves out at least one of them.

Q: The concurrent version system (CVS) is widely used for version control, where it is originally designed for source code, but useful for any text-based file, then CVS system must perform :(i) Establishing a simple repository.(ii) Maintains all version of a file in a single named file by storing only the difference between progressive version of the original file.(iii) Protect against simultaneous changes to a file by establishing different directories for each developer thus insulating one from another.(iv) The CVS merges changes when each developer completes the work.

CVS performs all four, so the answer is (i), (ii), (iii) and (iv).Pressman's description of the Concurrent Versions System lists exactly these: it establishes a simple repository; it keeps all versions of a file in a single named file by storing only the differences between successive versions; it protects against simultaneous changes by giving each developer a separate working directory; and it merges the changes when each developer finishes.Each three-item option leaves out one of these functions.

Q: Software Configuration Management (SCM) provides systematic evolution of a software under development and provides for :(i) Visibility(ii) Controlled change(iii) Traceability(iv) Monitoring

The key is (i), (ii), (iii) and (iv), all four, and the exact list could not be traced to a source.Software configuration management keeps track of the items that make up a system and how they change. Visibility means everyone can see the state of each item and version. Controlled change means a change is requested, reviewed and approved before it is made. Traceability links a version back to the change request and forward to what depends on it. Monitoring is keeping watch on the changes and the status of configuration items. All four are standard aims of SCM.The other options each leave out at least one of these aims, so the option listing all four, C, is the answer.

Q: Which of the following scenario necessitates file locking to be enabled by an Integrated Development Environment (IDE) ?

File locking is needed to prevent concurrent access to a source code file.When several developers or processes might edit the same file at the same time, one person's changes could overwrite another's. Locking lets only one editor change the file at a time, so updates are not lost.Privacy and protection against unauthorised access are matters of permissions and access control, not locking. Versioning is handled by a version control system, which records successive versions whether or not a lock is held.

Q: .................. procedures are concerned with analysing the costs and benefits of proposed changes, approving those changes that are worthwhile and tracking which components of the system have been changed.

These are change management procedures.Change management analyses the costs and benefits of proposed changes, approves those that are worthwhile and tracks which components of the system have been changed, so that evolution is controlled and documented.Cost estimation predicts the effort and cost of development, testing checks the software for defects, and 'software' is not a procedure at all. None of them covers approving and tracking changes.

Select the components from the following which contributes in the building of software configuration management (SCM) :

(i) Software configuration identification (SCI)
(ii) Change control
(iii) Configuration status accounting
(iv) Configuration audit

A.(ii) and (iv)
B.(i), (ii), (iii) and (iv)
C.(i), (ii) and (iii)
D.(i), (iii) and (iv)

Exam Year(s)

MH SET - 2019, SET Exam - 2019,

Answer: B

All four contribute, so the answer is (i), (ii), (iii) and (iv).

Software configuration management rests on identifying the configuration items, the work products to be controlled (i); controlling changes to them through a formal change-control process (ii); recording and reporting the status of each item and change, configuration status accounting (iii); and auditing that the configuration actually matches its documentation and that approved changes were made correctly (iv). These are the classic SCM functions.

Each of the other options leaves out at least one of them.

Discuss in Forum

The concurrent version system (CVS) is widely used for version control, where it is originally designed for source code, but useful for any text-based file, then CVS system must perform :

(i) Establishing a simple repository.
(ii) Maintains all version of a file in a single named file by storing only the difference between progressive version of the original file.
(iii) Protect against simultaneous changes to a file by establishing different directories for each developer thus insulating one from another.
(iv) The CVS merges changes when each developer completes the work.

A.(i), (ii) and (iii)
B.(i), (ii), (iii) and (iv)
C.(i), (ii) and (iv)
D.(ii), (iii) and (iv)

Exam Year(s)

MH SET - 2020, SET Exam - 2020,

Answer: B

CVS performs all four, so the answer is (i), (ii), (iii) and (iv).

Pressman's description of the Concurrent Versions System lists exactly these: it establishes a simple repository; it keeps all versions of a file in a single named file by storing only the differences between successive versions; it protects against simultaneous changes by giving each developer a separate working directory; and it merges the changes when each developer finishes.

Each three-item option leaves out one of these functions.

Discuss in Forum

During the change control process, which of the following activities are required to be initiated ?

(i) While software configuration identification (SCI) is under development it can change freely since it is not under SCM.
(ii) While under review, the software configuration identification (SCI) is considered to be "Frozen".
(iii) Once SCI is reviewed and approved, it is entered into a library; the SCI is now formally under SCM.
(iv) Check in-check out process : once the change has been approved, the SCI has to be checked out from the library for change; once the change has been implemented, the SCI must be checked in to the library.

A.(i), (ii), (iii) and (iv)
B.(ii), (iii) and (iv)
C.(i), (ii) and (iii)
D.(i) and (iv)

Exam Year(s)

MH SET - 2021, SET Exam - 2021,

Answer: A

All four statements belong to the change control process, so the answer is (i), (ii), (iii) and (iv).

In software configuration management, a configuration item can change freely while it is being developed, since it is not yet under SCM (i). While it undergoes formal technical review it is treated as frozen (ii). Once reviewed and approved it becomes a baseline and is entered into the project library, after which it is formally under SCM (iii). From then on, changes go through check-out and check-in: an approved change checks the item out of the library and checks the modified version back in, which provides access and synchronisation control (iv).

Each option that leaves a statement out omits a genuine stage of the process.

Discuss in Forum

Software Configuration Management (SCM) provides systematic evolution of a software under development and provides for :

(i) Visibility
(ii) Controlled change
(iii) Traceability
(iv) Monitoring

A.(i), (ii) and (iii)
B.(i), (ii) and (iv)
C.(i), (ii), (iii) and (iv)
D.(ii) and (iii)

Exam Year(s)

MH SET - 2023, SET Exam - 2023,

Answer: C

The key is (i), (ii), (iii) and (iv), all four, and the exact list could not be traced to a source.

Software configuration management keeps track of the items that make up a system and how they change. Visibility means everyone can see the state of each item and version. Controlled change means a change is requested, reviewed and approved before it is made. Traceability links a version back to the change request and forward to what depends on it. Monitoring is keeping watch on the changes and the status of configuration items. All four are standard aims of SCM.

The other options each leave out at least one of these aims, so the option listing all four, C, is the answer.

Discuss in Forum

Which of the following scenario necessitates file locking to be enabled by an Integrated Development Environment (IDE) ?

A.To ensure the privacy of a source code file
B.To prevent un-authorized access to a source code file
C.To prevent concurrent access to a source code file
D.To enable proper versioning of a source code file

Exam Year(s)

MH SET - 2025, SET Exam - 2025,

Answer: C

File locking is needed to prevent concurrent access to a source code file.

When several developers or processes might edit the same file at the same time, one person's changes could overwrite another's. Locking lets only one editor change the file at a time, so updates are not lost.

Privacy and protection against unauthorised access are matters of permissions and access control, not locking. Versioning is handled by a version control system, which records successive versions whether or not a lock is held.

Discuss in Forum

.................. procedures are concerned with analysing the costs and benefits of proposed changes, approving those changes that are worthwhile and tracking which components of the system have been changed.

A.Change management
B.Cost estimation
C.Software
D.Testing

Exam Year(s)

MH SET - 2025, SET Exam - 2025,

Answer: A

These are change management procedures.

Change management analyses the costs and benefits of proposed changes, approves those that are worthwhile and tracks which components of the system have been changed, so that evolution is controlled and documented.

Cost estimation predicts the effort and cost of development, testing checks the software for defects, and 'software' is not a procedure at all. None of them covers approving and tracking changes.

Discuss in Forum

Loading…

Topics

Other Subjects

Tags: Configuration Management Questions and Answers || Configuration Management MCQ Questions and Answers || Configuration Management GK Questions and Answers || Configuration Management GK MCQ Questions || Configuration Management Multiple Choice Questions and Answers || Configuration Management GK || GK on Configuration Management || Software Engineering Questions and Answers || Software Engineering MCQ Questions and Answers || Software Engineering GK Questions and Answers || GK on Software Engineering

Configuration Management Questions and Answers

Topics

Other Subjects

About Us

Stay informed about all important Dates & Notifications